TV Mounting in Tampines New Town

Usually only with the landlord's written permission, since mounting leaves 4-6 anchor holes. Many tenancy agreements class it as an alteration. Alternatives that need no drilling: a TV floor stand, or a heavy-duty easel-style mount. If you do get permission, keep the mount and ask the installer to patch holes when you move out — it is a quick filler-and-paint job.

Fixed mounts sit flattest against the wall and are cheapest. Tilting mounts angle down 5-15 degrees — useful when the TV sits above eye level. Full-motion (articulating) mounts extend and swivel, which suits corner installs or rooms with multiple viewing positions; they cost the most and need the most secure fixing because the load hangs away from the wall.

Small TVs (under about 40 inches) can go on hollow drywall with heavy-duty toggle anchors rated for the load, but most professionals prefer to hit at least one stud or install a plywood backing board. For TVs over 50 inches, mounting into studs or masonry is strongly recommended — anchor-only installs on hollow walls are the most common cause of fallen TVs.

Most TV mounting jobs are priced as a flat rate per TV, driven by three things: TV size, mount type (fixed, tilting, or full-motion), and wall material. Drywall or plasterboard with timber studs is the cheapest; brick, concrete, or above-fireplace installs cost more. Cable concealment is usually a separate add-on. Ask for the all-in price for your exact TV size and wall type before booking.

Most walls yes, but not structural columns, beams, or reinforced-concrete walls (commonly the wall around the bomb shelter/store room). Drilling into structural members breaches HDB renovation rules. An experienced installer identifies safe walls on sight; partition walls in newer BTO flats may be drywall panels needing special anchors.

Because HDB and most condo walls are solid concrete — there is no cavity to drop cables into. Installers instead use slim paintable PVC trunking, typically included or a small add-on. True concealed wiring requires hacking a channel into concrete, which is a renovation-scale job requiring an HDB permit for certain walls.