TV Mounting in Pasir Ris New Town

Search for handymen or dedicated TV installers in Pasir Ris New Town with recent reviews that mention your wall type (drywall, brick, or concrete). Ask three things up front: the flat price for your TV size and wall type, whether they carry liability insurance, and whether cable concealment is included or an add-on. A good installer asks about your wall and TV model before quoting.

Not for the mounting itself. You need one only if you want a new power outlet behind the TV, since fixed wiring is electrician-only work in most countries. Many TV mounting companies partner with an electrician or offer the outlet as an add-on — ask when booking so it happens in one visit.

A standard install on a stud or masonry wall takes 30-90 minutes. Add 1-2 hours if cables are being concealed inside the wall, and more again for above-fireplace installs or walls that need reinforcement. Book a 2-hour window to be safe.

Most will, as a small add-on — typically a quarter to half the price of a fresh install. Dismount-and-remount in a new home (or after moving the sofa) is a standard job; mention it when booking so the installer brings patching filler for the old holes.

Yes if done properly, but check two things: heat (run the fireplace for 30 minutes and confirm the wall above stays below about 40C / 100F, or fit a mantel to deflect heat) and viewing angle (a pull-down or tilting mount stops neck strain). Above-fireplace installs cost more because the wall is usually brick or stone and cable routing is harder.

Under 43 inches is a reasonable DIY job if you can find studs and use a level. From 55 inches up, a second pair of hands is essential and mistakes get expensive — a 65-inch panel weighs 20-25 kg and modern bezel-less screens crack easily if gripped wrong. Professionals also carry stud finders, cable detectors, and masonry drills most households lack.

Most walls yes, but not structural columns, beams, or reinforced-concrete walls (commonly the wall around the bomb shelter/store room). Drilling into structural members breaches HDB renovation rules. An experienced installer identifies safe walls on sight; partition walls in newer BTO flats may be drywall panels needing special anchors.

Because HDB and most condo walls are solid concrete — there is no cavity to drop cables into. Installers instead use slim paintable PVC trunking, typically included or a small add-on. True concealed wiring requires hacking a channel into concrete, which is a renovation-scale job requiring an HDB permit for certain walls.