Lighting Installation in Novena

Per fixture for straightforward swaps (replacing a pendant or fitting downlights into existing wiring), hourly for exploratory or fault work, and quoted per project for new circuits, dimmers across rooms, or outdoor schemes. Height, ceiling access and whether wiring exists at the point drive cost more than the fixture itself.

Common culprits: non-dimmable LEDs on a dimmer, leading-edge dimmers driving LED loads, switch-loop induced ghost voltage, or cheap drivers. An electrician can match the dimmer to the load or fit a bypass capacitor — usually a quick, inexpensive fix.

Usually — it needs weatherproof (IP-rated) fittings, protected cable runs (buried or clipped), and often RCD/GFCI protection on the circuit. Low-voltage garden systems are cheaper to extend safely; mains-voltage outdoor work is firmly electrician territory.

Bathrooms have zoned rules: fittings near showers and baths must carry appropriate ingress protection (IP) ratings, and many jurisdictions restrict who may do the work. Choose IP44 or better near water and confirm the installer knows the zone requirements.

In Novena, simple fixture swaps sit at the minimum-callout end, while multi-room downlight projects and new outdoor circuits are quoted per project. Bundling several fittings into one visit spreads the callout cost and is the single best way to lower the per-fixture price.

New or relocated points involve fixed wiring — that's Licensed Electrical Worker territory, usually arranged through your renovation contractor. Simple swaps of fittings on existing points are handyman jobs at much lower cost.