How much does lighting installation cost in Singapore?
Free, no obligation. Sign in with Google to send your request.
Key takeaways
- Most lighting installation jobs in Singapore land between SGD 100–SGD 2,000 — known locally as light installation.
- Electrical installation work in Singapore is regulated by EMA with Licensed Electrical Workers required for fixed wiring; HDB renovation rules additionally govern concealed wiring in flats. Handyman fitting swaps on existing points are standard practice.
- Prices below are researched national ranges, updated July 2026 — not quotes.
Lighting Installation prices by job size in Singapore
| Job size | Low | Typical | High |
|---|---|---|---|
| Replace 3-4 existing fittings Swap ceiling lights/fans on existing points, one visit | SGD 100 | SGD 180 | SGD 320 |
| Downlights for living room (6 LED) Six LED downlights into false ceiling with wiring | SGD 350 | SGD 550 | SGD 900 |
| Whole-flat lighting refresh 10-15 points swapped/added during renovation | SGD 700 | SGD 1,200 | SGD 2,000 |
Per-unit rates
| Unit | Low | Typical | High |
|---|---|---|---|
| per fitting installed | SGD 30 | SGD 60 | SGD 120 |
| per new wiring point | SGD 80 | SGD 130 | SGD 220 |
What affects the price
- Job size and scope — bigger or more complex jobs move you up the ranges above.
- Access and condition — hard-to-reach areas, older properties or neglected maintenance add labour time.
- Materials and quality level — where materials are involved, the grade you choose often matters more than labour.
- Urgency — same-day or out-of-hours work usually carries a premium.
- Where you live — large metros in Singapore typically run above the national range; smaller towns below it.
How to save
- Get at least three quotes and compare like-for-like scopes, not just totals.
- Be flexible on timing — off-peak slots are often cheaper.
- Bundle related tasks into one visit to spread call-out costs.
- Agree the scope in writing up front to avoid change-order surprises.
How to hire a lighting installation pro in Singapore
- Fixed wiring work in Singapore must be done or supervised by an EMA Licensed Electrical Worker (LEW)
- Simple fitting swaps on existing points are commonly done by handyman services; new wiring points need an LEW
- For HDB flats, follow HDB renovation guidelines — concealed wiring changes need permit-compliant contractors
- Get per-fitting pricing; false-ceiling cove lighting and L-box LED strips are quoted per metre
- Confirm the installer disposes of old fittings
- Get a receipt with warranty on workmanship
Red flags
- New wiring by unlicensed renovation workers
- Cove LED strips wired without proper drivers or connectors
- No receipt
- Ceiling fans hung on non-rated hooks
How Handld researches prices
These are researched estimates, not quotes and not our transaction data. We compile ranges from published sources — national statistics, trade bodies and incumbent cost guides — normalise them to SGD, and adjust city pages by a population-based cost tier. Last updated July 2026. Basis: SG handyman/electrician platform rates; EMA LEW requirements.
Frequently asked questions
How much does it cost to install downlights?
Priced per point: cutting in, wiring and fitting each recessed light, with the first costing more than each additional one on the same run. Fire-rated housings, insulation-contact (IC) ratings, and dimming add per-unit cost. A typical room takes 4-8 downlights.
Do I need an electrician to change a light fitting?
Rules vary by country — some allow DIY like-for-like swaps, others make almost all fixed wiring licensed work. Beyond legality: anything involving new cabling, no earth wire present, unfamiliar switch loops, or bathroom zones is genuinely worth a professional regardless.
How is lighting installation priced?
Per fixture for straightforward swaps (replacing a pendant or fitting downlights into existing wiring), hourly for exploratory or fault work, and quoted per project for new circuits, dimmers across rooms, or outdoor schemes. Height, ceiling access and whether wiring exists at the point drive cost more than the fixture itself.
Why do my LED lights flicker or glow when off?
Common culprits: non-dimmable LEDs on a dimmer, leading-edge dimmers driving LED loads, switch-loop induced ghost voltage, or cheap drivers. An electrician can match the dimmer to the load or fit a bypass capacitor — usually a quick, inexpensive fix.
Is outdoor and garden lighting a bigger job than indoor?
Usually — it needs weatherproof (IP-rated) fittings, protected cable runs (buried or clipped), and often RCD/GFCI protection on the circuit. Low-voltage garden systems are cheaper to extend safely; mains-voltage outdoor work is firmly electrician territory.
What should I know about bathroom lighting?
Bathrooms have zoned rules: fittings near showers and baths must carry appropriate ingress protection (IP) ratings, and many jurisdictions restrict who may do the work. Choose IP44 or better near water and confirm the installer knows the zone requirements.
What is involved in adding a dimmer switch?
Swapping the switch is quick, but the dimmer must match the load type — LED lamps need trailing-edge dimmers and 'dimmable' rated bulbs, or you get flicker and buzz. Smart dimmers may also need a neutral at the switch, which older homes often lack.
Who should install new lighting points in my HDB flat?
New or relocated points involve fixed wiring — that's Licensed Electrical Worker territory, usually arranged through your renovation contractor. Simple swaps of fittings on existing points are handyman jobs at much lower cost.
Free, no obligation. Sign in with Google to send your request.