Flooring Installation in Yew Tee

Most quote by area (per square metre or square foot) for the installation itself, with fixed add-ons for prep, removal and trims. Very small jobs are often charged as a half-day or day minimum, so a tiny room can cost disproportionately more per unit of area.

It depends mostly on the material. Laminate and vinyl (LVP/LVT) are the cheapest to buy and fastest to fit; engineered wood costs roughly double; solid hardwood and premium tile cost the most. As a rule of thumb labour is 30-50% of the total, with materials, underlay, trims and subfloor prep making up the rest. Get quotes priced per square metre or square foot so you can compare like for like.

Laminate and click-lock vinyl plank are usually cheapest overall: low material cost plus a fast floating installation that needs no glue or nails. Sheet vinyl can be even cheaper per unit but needs a very flat subfloor. Carpet is comparable but is normally quoted by carpet fitters rather than hard-flooring installers.

Vinyl plank (LVP/LVT) is fully waterproof, so it is the safer choice for kitchens, bathrooms and laundries, and it is quieter underfoot. Laminate has a harder, more scratch-resistant wear surface and often looks more like real wood, but standard laminate swells if water sits on it. Prices overlap heavily, so choose by room use rather than price.

A single room in click-lock laminate or vinyl is typically done in a day. A whole apartment or house takes 2-5 days depending on area, furniture moving, and how much old flooring must come out. Add a day or more if the subfloor needs levelling compound, and 2-3 days of acclimatisation before wood products are laid.

Not always. Floating floors (laminate, click vinyl) can usually be laid over existing hard, flat surfaces like tile or old vinyl, which saves removal and disposal costs. Carpet always has to come out first. Overlaying raises the floor height, so doors may need trimming and thresholds adjusting — make sure the quote covers that.

Installed click vinyl typically runs S$4-S$12 per square foot depending on wear layer and brand, with S$6-S$9 the common mid-range. Laminate is similar; engineered wood runs roughly S$12-S$25 per square foot installed.

Overlay is much cheaper and faster: no HDB permit, no hacking labour, no debris disposal, and the flat stays liveable. Hacking is only necessary when existing tiles are hollow/popping, floor height is a problem, or you want tile or thick wood that needs a fresh screed.