Flooring Installation in Keat Hong Village

Ask how long they have fitted your specific material, whether they carry public liability insurance, who does subfloor prep and what it costs, how they handle door trimming and thresholds, their lead time, and what workmanship warranty they give in writing. Two or three quotes from local installers in Keat Hong Village is usually enough to see the fair market rate.

Laminate and click-lock vinyl plank are usually cheapest overall: low material cost plus a fast floating installation that needs no glue or nails. Sheet vinyl can be even cheaper per unit but needs a very flat subfloor. Carpet is comparable but is normally quoted by carpet fitters rather than hard-flooring installers.

Yes. Solid and engineered wood (and to a lesser degree laminate) should sit in the room where it will be installed for 48-72 hours so it adjusts to local temperature and humidity. Skipping this step is a common cause of gapping and buckling months later. A good installer will schedule delivery a few days before fitting.

Click-lock laminate and vinyl are realistic DIY projects if the subfloor is flat and rooms are simple rectangles. Glue-down vinyl, nail-down hardwood and tile are much less forgiving and usually worth paying for. Note that some manufacturers only honour warranties when a professional installs the product, and mistakes in prep are expensive to undo.

Waterproof materials: vinyl plank/tile, ceramic or porcelain tile, or specifically water-rated laminate. Standard laminate and solid wood swell when water gets into joints, so most installers will advise against them in wet rooms even if you like the look.

A single room in click-lock laminate or vinyl is typically done in a day. A whole apartment or house takes 2-5 days depending on area, furniture moving, and how much old flooring must come out. Add a day or more if the subfloor needs levelling compound, and 2-3 days of acclimatisation before wood products are laid.

Installed click vinyl typically runs S$4-S$12 per square foot depending on wear layer and brand, with S$6-S$9 the common mid-range. Laminate is similar; engineered wood runs roughly S$12-S$25 per square foot installed.

Overlay is much cheaper and faster: no HDB permit, no hacking labour, no debris disposal, and the flat stays liveable. Hacking is only necessary when existing tiles are hollow/popping, floor height is a problem, or you want tile or thick wood that needs a fresh screed.