Demolition Services in Singapore

A soft strip (or strip-out) removes internal non-structural items — fixtures, fittings, linings, services — leaving the structure. Full demolition takes down the structure itself. Renovations usually need a strip-out; only rebuilds or clearances need structural demolition, which is far more involved and regulated.

For anything structural — removing walls, demolishing a building or a large extension — yes, almost always (see country notes). Interior soft-strip of non-structural elements often doesn't, but check locally. Utilities must be safely disconnected first, and neighbours may need notifying.

It scales with what's being removed: an interior strip-out of a single room is the cheap end; a full internal gut of a home is mid-range; a complete structural demolition of a building is the big job. Debris volume, disposal fees, access for machinery, and any hazardous materials drive the price more than floor area alone.

A room strip-out is often a day or two; a full house gut a few days to a week; a full structural demolition one to two weeks including site clearance. Asbestos removal, permits and utility disconnections add lead time before work can even start.

Gas, electricity and water must be professionally disconnected (capped) by the utility or a licensed trade before demolition begins — not just switched off. This is a safety-critical step; a reputable demolition contractor coordinates it and won't start until it's confirmed.

For any building built before asbestos bans (broadly pre-2000), yes — a survey and, if found, licensed removal must happen before demolition. Disturbing asbestos is a serious health hazard and is tightly regulated; a contractor who ignores this is a major red flag.

Yes — hacking works need an HDB renovation permit, and structural walls must never be hacked without HDB/BCA approval and a Professional Engineer. Use an HDB-registered contractor who applies for the permit and observes the permitted hacking hours.