Carpentry in Serangoon New Town
Compare local carpentry (built-in furniture) pros in Serangoon New Town and get free quotes — no obligation, no call-backs you didn't ask for.
Typical price: SGD 75–SGD 27,600
Free, no obligation. Sign in with Google to send your request.
Carpentry prices in Serangoon New Town
| Job size | Low | Typical | High |
|---|---|---|---|
| Minor repair Adjust hinges, re-laminate or repair existing carpentry | SGD 75 | SGD 180 | SGD 370 |
| Single built-in unit TV console, study desk or shoe cabinet | SGD 1,400 | SGD 2,750 | SGD 5,500 |
| Full-home carpentry package Wardrobes, kitchen and living built-ins for a flat | SGD 7,350 | SGD 13,800 | SGD 27,600 |
How to hire a carpentry pro in Singapore
- In Singapore, 'carpentry' usually means built-in furniture — priced per foot run; clarify whether the rate covers top and bottom cabinets separately
- For HDB flats, use HDB-registered renovation contractors for works needing permits
- Check the material spec: plywood with laminate is standard; ask for the laminate brand and internal finish
- Confirm soft-close hardware brands (Blum, Hafele) in the quote
- Ask about the workshop lead time — typically 2-4 weeks fabrication
- Get a warranty in writing (1-5 years typical from reputable firms)
Singapore carpentry is dominated by built-in furniture fabricated off-site and installed during renovation; renovation works in HDB flats require HDB-registered contractors and permits for affected works. Pricing per foot run is the market convention.
Budgeting first?
See the full breakdown of what drives carpentry prices — job sizes, unit rates, and how to save.
Frequently asked questions
What jobs does a carpenter typically handle?
Door hanging and adjustment, skirting/trim and architraves, custom shelving and built-in wardrobes, stair repairs, timber framing, decking frames, stud walls, and repair of rot or damaged timber. Anything cut and fitted from wood on site is carpentry territory.
Can a carpenter fix rotten or water-damaged wood?
Yes — splice repairs, resin treatments and section replacement are standard work. But rot is a symptom: the leak or damp source must be fixed first or the repair fails. A good carpenter will point at the water source before quoting the timber fix.
How much do built-in wardrobes or shelving cost?
Custom built-ins are priced by the linear metre/foot and complexity — an alcove shelving unit costs far less than a floor-to-ceiling fitted wardrobe with doors and internals. Materials (MDF vs veneer vs solid timber) can swing the price by 2-3x for the same footprint.
What should I check before hiring a carpenter in Serangoon New Town?
Photos of finished work at close range (joints, edges, scribing against uneven walls tell you everything), proof of insurance, and references from jobs similar to yours. In Serangoon New Town, check whether your job size triggers any local licensing requirement before work starts.
Do I need a licensed carpenter?
Depends where you live: some jurisdictions license structural or high-value carpentry work, while trim and furniture work is unlicensed almost everywhere. For structural jobs (framing, load-bearing changes), check Serangoon New Town's local rules — and always verify insurance regardless of licensing.
How much does a carpenter cost?
Carpenters charge by the hour, by the day, or per project for defined jobs like built-ins. Rates vary with specialisation: rough/framing carpentry is priced into construction budgets, while finish carpentry (trim, doors, built-ins) commands higher hourly rates for slower, more precise work.
How do I get an accurate carpentry quote?
Photos plus measurements get you a ballpark; a site visit gets you a real number. Specify materials, finish (painted, stained, veneer) and hardware up front — 'a shelf' can cost 5x more in walnut with soft-close fittings than in painted MDF.
How is carpentry priced in Singapore?
Per foot run: built-in wardrobes typically SGD 250-450 per foot, kitchen cabinets SGD 120-300 per foot for top and bottom separately, TV consoles and study units in between. Material and hardware brands drive the spread.
Free, no obligation. Sign in with Google to send your request.
How Handld works
- 1
Tell us what you need
Describe the job and where you are. It takes about a minute.
- 2
We match your request
Your request goes to local professionals who cover your area and service.
- 3
Compare quotes and choose
Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.