Roofing in San Fernando
Compare local roofing contractor pros in San Fernando and get free quotes — no obligation, no call-backs you didn't ask for.
Typical price: ₱3,000–₱300,000
Free, no obligation. Sign in with Google to send your request.
Roofing prices in San Fernando
| Job size | Low | Typical | High |
|---|---|---|---|
| Leak / sheet repair Replace damaged sheets, reseal fasteners and flashings | ₱3,000 | ₱8,000 | ₱25,000 |
| Partial re-roof Replace one section of sheeting | ₱30,000 | ₱60,000 | ₱120,000 |
| Full re-roof (~100 m²) Strip and replace with pre-painted GI sheets | ₱80,000 | ₱150,000 | ₱300,000 |
How to hire a roofing pro in Philippines
- Schedule work in the dry season (roughly December-May), before typhoon season
- Specify the metal sheet gauge/thickness and coating (pre-painted GI is standard) in writing — thin sheets fail in typhoons
- Ask for wind-rated fastening details (screw type and spacing), not just 'yero installation'
- Building permits apply to structural work under the National Building Code; large contracts need PCAB-licensed contractors
- For labour-only arrangements, agree the per-m² labour rate and who buys materials
- Get a written scope with schedule and staged payments
Typhoon exposure makes wind-rated fastening and adequate sheet gauge the critical specification items in Philippine roofing. Building permits are required for structural work under the National Building Code, and larger contracts require PCAB-licensed contractors, though small repairs are commonly informal labour-only jobs.
Budgeting first?
See the full breakdown of what drives roofing prices — job sizes, unit rates, and how to save.
Frequently asked questions
Can a new roof be installed over the old one?
Sometimes — an overlay saves tear-off cost but hides deck problems, adds weight, and often shortens the new roof's life and warranty. Many codes and manufacturers limit roofs to two layers. Tear-off costs more upfront and is usually the better long-term decision; get both options priced.
Should gutters be replaced at the same time as the roof?
Often worth it: the access equipment is already up, edge details integrate cleanly, and combined pricing beats two separate jobs. If your gutters are under ten years old and sound, keep them — but have the roofer protect them during tear-off and note their condition in writing.
Do I need a permit for roof work?
Full replacements commonly require a building permit or regulatory compliance; small like-for-like repairs usually don't. Rules vary by country and municipality, and a legitimate contractor will know and handle the paperwork — treat 'we don't need a permit' on a full reroof as a flag to double-check.
How long does a roof replacement take?
A straightforward single-family roof takes 1-3 days for asphalt shingles or metal sheeting, and up to 1-2 weeks for tile, slate or complex multi-plane roofs. Weather delays are normal — a competent crew will never strip more roof than they can waterproof the same day.
How much does roofing cost in the Philippines?
Re-roofing with pre-painted GI sheets typically runs ₱800-₱2,600 per m² for materials plus labour, with labour alone at ₱150-₱500 per m². A full re-roof of a 100 m² home commonly lands at ₱80,000-₱300,000 depending on gauge, insulation and structure.
When should I schedule roof work in the Philippines?
In the dry months, roughly December to May. Typhoon season (June-November) both causes the damage and makes repair scheduling unreliable — and post-typhoon demand spikes push prices up and quality down. Pre-season inspection is the cheap option.
Free, no obligation. Sign in with Google to send your request.
How Handld works
- 1
Tell us what you need
Describe the job and where you are. It takes about a minute.
- 2
We match your request
Your request goes to local professionals who cover your area and service.
- 3
Compare quotes and choose
Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.