Electrician in Auckland

Rewiring is priced per circuit or per property size and is one of the most invasive electrical jobs — walls are opened, and the house may be partly without power for days. Expect a multi-day job costing two to three orders of magnitude more than a service call. Get itemised quotes (per room or per point), and ask what wall-repair 'making good' is included, as that is where quotes diverge most.

Clear access to the panel/consumer unit and the work areas, list every symptom (which outlets, when, what trips), and note the age of the property and any known previous electrical work. If you rent, get the landlord's approval first — in most countries electrical modifications are the landlord's call and often their cost.

Older properties bring surprises: cloth-insulated or aluminium wiring, missing earth conductors, buried junction boxes, and panels with no spare capacity. Electricians price this risk in, and mid-job discoveries produce variation orders. If your home is 40+ years old and hasn't been rewired, an inspection first is money well spent — it converts unknowns into a priced list.

The fee covers travel and the first block of time on site, and it protects the electrician against 30-minute jobs that consume half a morning with travel. It is standard in most markets. Ask whether it includes the first hour and whether it is waived or credited if you proceed with quoted work.

Strongly recommended anywhere, and formalised in some countries (periodic inspection reports, compliance certificates at sale). An inspection typically costs a few hours of labour and reveals dangerous DIY history, degraded insulation, missing earthing, and undersized panels — exactly the defects that are expensive to discover after moving in. Use the report as a negotiation item.

Hourly rates typically run $80-$130 plus a call-out/vehicle charge of $50-$100. Auckland and Wellington sit at the top of the range. Emergency after-hours work runs roughly 1.5-2x standard rates.

A narrow band of DIY is legal in your own home — like-for-like replacement of switches, sockets, and light fittings on existing low-risk circuits — but new circuits, switchboard work, and anything in damp areas requires a registered electrician, and prescribed work needs certification. When selling, uncertified work becomes your problem.