Electrician near you in New Zealand

Burning smells from outlets or the panel, sparking, buzzing from the consumer unit, repeated breaker trips you can't isolate, and any exposed live wiring — switch off the affected circuit (or the main switch) and call an emergency electrician. A single dead outlet or a tripped breaker that resets and holds is a next-business-day job at standard rates.

The fee covers travel and the first block of time on site, and it protects the electrician against 30-minute jobs that consume half a morning with travel. It is standard in most markets. Ask whether it includes the first hour and whether it is waived or credited if you proceed with quoted work.

A straightforward swap on an existing, sound circuit is typically a minimum-charge visit of under an hour. Costs rise when the fixture is heavy (needs a rated box or bracing), ceilings are high (ladder or scaffold work), or the existing wiring turns out to be degraded. Buying the fixture yourself and paying labour-only is normal and usually cheapest.

The panel (consumer unit, fuse board, DB board) distributes power to your circuits. Upgrades are needed when it uses obsolete fuses, lacks modern safety devices (RCD/GFCI/RCBO protection), trips constantly, or can't support new loads like an EV charger or induction range. It is regulated work in most countries and usually requires certification or inspection — budget for a licensed pro, never DIY.

Rewiring is priced per circuit or per property size and is one of the most invasive electrical jobs — walls are opened, and the house may be partly without power for days. Expect a multi-day job costing two to three orders of magnitude more than a service call. Get itemised quotes (per room or per point), and ask what wall-repair 'making good' is included, as that is where quotes diverge most.

Hourly rates typically run $80-$130 plus a call-out/vehicle charge of $50-$100. Auckland and Wellington sit at the top of the range. Emergency after-hours work runs roughly 1.5-2x standard rates.

A narrow band of DIY is legal in your own home — like-for-like replacement of switches, sockets, and light fittings on existing low-risk circuits — but new circuits, switchboard work, and anything in damp areas requires a registered electrician, and prescribed work needs certification. When selling, uncertified work becomes your problem.