Pressure Washing in Toronto

Safe at high pressure: concrete, block paving, natural stone (with care), brick in good condition, metal fences and gutter exteriors. Needs low pressure or soft washing: painted surfaces, render, timber decking, vinyl or fibre-cement siding, roofs, and old or repointed brickwork. Never pressure wash: single-glazed windows at close range, electrical fittings, or asbestos-containing materials.

Four things drive the spread: surface area and condition (heavy staining doubles the time), access (upper storeys, tight side passages), method (soft washing with chemicals costs more than a quick rinse), and what is bundled (resealing, weed treatment, gutter clear-out). A cheap quote is often just a rinse with no pre-treatment — clarify the scope before comparing numbers.

Yes. Too much pressure or the wrong nozzle can etch concrete, blast mortar out of brick joints, splinter timber decking, strip paint, and force water behind siding or render. Roof tiles are especially vulnerable. Ask the pro what PSI and nozzle they plan to use per surface, and whether they soft wash delicate areas.

A proper quote lists: each surface and its approximate area, the method per surface (high pressure vs soft wash), pre-treatments or chemicals used, weed and moss removal, rinsing and tidy-up, and whether resealing or re-sanding is included. It should also state who supplies water and power, and what happens if rain forces a reschedule.

Fresh oil mostly comes out with a degreaser pre-treatment plus hot-water pressure washing. Old oil that has soaked deep into concrete may only fade, not disappear — an honest pro will tell you this before quoting rather than promising full removal. Ask specifically whether stain treatment is included or extra.

Most pros charge either by the hour or by surface area. A single driveway or patio is typically a 1-3 hour job at the low end of a pro's minimum call-out, while a full house exterior wash costs several times more. Get the quote broken down by surface (driveway, walls, deck, roof) so you can drop items to fit your budget.

Roughly April to October in most provinces — pros stop when temperatures approach freezing because wet surfaces become ice hazards and equipment can freeze. That short season means spring slots book out weeks ahead; fall is often easier to schedule.

A typical single-storey house wash runs roughly $250-$500, and driveways $130-$400 depending on size and staining. Expect quotes 10-20% above US prices in dollar terms, with Toronto and Vancouver at the top of the range.