Garage Door Repair in Victoria

Worn rollers, loose hardware and dry hinges cause most rattles — an annual service (tighten, lubricate, balance-check) fixes them cheaply. Grinding or jerky travel points at track alignment or a failing opener drive. Noise on the way up plus a heavy-feeling door means the springs are losing tension.

Yes — genuinely. Torsion springs store enough energy to cause serious injury when unwound incorrectly, and they're the single most common cause of garage-door DIY accidents. Spring replacement is cheap professional work; there is no good reason to DIY it.

A service covers spring tension and balance, cable and roller condition, track alignment, hardware tightening, lubrication and opener safety tests (auto-reverse). Annually serviced doors break far less and their openers last longer — it's the cheapest insurance this trade sells.

Openers typically last 10-15 years. Replacement makes sense when the logic board or motor fails outside warranty — modern units add safety reversal, quieter belt drives and smartphone control. Installation on an existing well-balanced door is a 2-3 hour job.

The most common culprits, in order: a snapped torsion spring (you'll often hear the bang), a failed opener or its remote/keypad batteries, a disengaged emergency release, or a blocked/misaligned safety sensor making the opener refuse to run. Springs and openers are pro repairs; sensors you can often realign yourself.

Re-tensioning or re-springing a roller door typically runs $150-350; opener replacement $350-700 fitted; a new single roller door $800-1,600 installed. Cyclone-rated doors in the north cost meaningfully more.