How much does door installation & repair cost in Australia?
Free, no obligation. Sign in with Google to send your request.
Key takeaways
- Most door installation & repair jobs in Australia land between A$120–A$2,800 — known locally as door installation and repair.
- Glazed doors must comply with AS 1288 safety glazing, and genuine security doors are tested to AS 5039 — a label worth verifying since look-alike mesh doors are common. Carpentry licensing applies above state value thresholds.
- Prices below are researched national ranges, updated July 2026 — not quotes.
Door Installation & Repair prices by job size in Australia
| Job size | Low | Typical | High |
|---|---|---|---|
| Interior door hang Hang one internal door with furniture fitted | A$120 | A$220 | A$380 |
| External door replacement Replace an entrance door-set with sealing and lockset | A$800 | A$1,500 | A$2,800 |
| Security screen door Supply and fit an AS 5039-rated security door | A$700 | A$1,100 | A$1,800 |
Per-unit rates
| Unit | Low | Typical | High |
|---|---|---|---|
| per hour | A$70 | A$95 | A$130 |
What affects the price
- Job size and scope — bigger or more complex jobs move you up the ranges above.
- Access and condition — hard-to-reach areas, older properties or neglected maintenance add labour time.
- Materials and quality level — where materials are involved, the grade you choose often matters more than labour.
- Urgency — same-day or out-of-hours work usually carries a premium.
- Where you live — large metros in Australia typically run above the national range; smaller towns below it.
How to save
- Get at least three quotes and compare like-for-like scopes, not just totals.
- Be flexible on timing — off-peak slots are often cheaper.
- Bundle related tasks into one visit to spread call-out costs.
- Agree the scope in writing up front to avoid change-order surprises.
How to hire a door installation & repair pro in Australia
- Check state licensing for job values (QBCC in QLD over $3,300; NSW over $5,000) — door work is usually carpentry-licensed territory at those levels
- Glazed doors must use safety glass to AS 1288
- For security doors, look for AS 5039-compliant products and licensed security installers where states require
- In bushfire-prone areas, confirm BAL-rated external doors
- Ask for an ABN invoice and public liability insurance
- Confirm disposal, sealing and hardware in the per-door quote
Red flags
- Non-safety glass in a glazed door
- 'Security door' that is flyscreen-grade mesh sold as AS 5039
- No ABN or written quote
- Unlicensed for the job value
- No local references
How Handld researches prices
These are researched estimates, not quotes and not our transaction data. We compile ranges from published sources — national statistics, trade bodies and incumbent cost guides — normalise them to AUD, and adjust city pages by a population-based cost tier. Last updated July 2026. Basis: hipages door installation guide; ServiceSeeking carpenter rates.
Frequently asked questions
Why won't my door close or latch properly?
Houses move and hinges wear: the classic faults are a sagging hinge, a swollen door in humid seasons, or a latch misaligned with its strike plate. All are quick fixes for a carpenter. A door that suddenly sticks along with wall cracks can signal settlement worth a builder's look.
What should an exterior door quote include?
The door-set spec (material, glazing, security rating), removal and disposal of the old door, fitting and sealing, threshold work, all hardware including the lock cylinder, and making good of trims both sides. Cheap quotes commonly exclude hardware and making-good — ask.
How much does door installation cost?
Hanging an interior door in an existing frame is a half-day carpentry job at the low end. Exterior doors cost several times more: the slab or door-set is pricier, and fitting involves weather sealing, security hardware and often frame work. Sliding, French and bifold sets are priced per opening and sit at the top.
How long does it take to fit a door?
An interior door in a good frame takes 1-2 hours for a pro; a slab needing hinge and lock cuts takes 2-4. Exterior door-sets take half a day to a day including sealing and hardware. Multi-panel sliding or bifold sets are usually a full day with two people.
Can I replace just the door without changing the frame?
Yes, if the frame is sound, square and the right size — that's a slab replacement and it's the cheapest path. If the frame is rotten, racked, or you want better security and sealing, replacing the whole door-set costs more but fixes the real problem.
What is the difference between a door slab and a prehung door?
A slab is just the door leaf — cheapest, but the installer must cut hinges and the lock to match your existing frame. A prehung/door-set arrives already hinged in its frame — dearer, but the fit and seal are better, and it's the sensible choice when the old frame is worn or out of square.
What does door installation cost in Australia?
Hanging an internal door typically runs $100-250 labour; external door replacement lands $800-2,500 installed, and AS 5039-rated security screen doors $700-1,500 fitted.
Free, no obligation. Sign in with Google to send your request.