Electrician in Mount Waverley
Compare local electrician (sparkie) pros in Mount Waverley and get free quotes — no obligation, no call-backs you didn't ask for.
Typical price: A$75–A$2,750
Free, no obligation. Sign in with Google to send your request.
Electrician prices in Mount Waverley
| Job size | Low | Typical | High |
|---|---|---|---|
| Power point or switch Replace or add a power point on existing circuit | A$75 | A$140 | A$260 |
| Light fixture or fan install Replace fixture or install ceiling fan | A$90 | A$180 | A$350 |
| Switchboard upgrade Modern board with RCD protection | A$740 | A$1,400 | A$2,750 |
| EV charger installation Dedicated circuit + charger install, excl. unit | A$550 | A$1,000 | A$2,000 |
How to hire a electrician pro in Australia
- Verify the state electrical licence — ALL electrical work in Australia legally requires a licensed electrician; DIY electrical work is illegal nationwide
- Check the licence on your state regulator's register (Energy Safe Victoria, NSW Fair Trading, etc.)
- Ask for a Certificate of Electrical Safety / compliance certificate on completion — required for most work
- Get the call-out fee and hourly rate up front ($80-$130/hr typical, call-out $70-$150)
- For bigger jobs (switchboard upgrades, EV chargers), get 2-3 quotes via hipages or direct
- Confirm insurance and warranty on labour
Australia has among the world's strictest electrical rules: all electrical wiring work, down to replacing a switch, must legally be performed by a licensed electrician, and most work requires a compliance certificate lodged with the state regulator. Fines for DIY electrical work apply in every state.
Budgeting first?
See the full breakdown of what drives electrician prices — job sizes, unit rates, and how to save.
Frequently asked questions
Why do older homes cost more for electrical work?
Older properties bring surprises: cloth-insulated or aluminium wiring, missing earth conductors, buried junction boxes, and panels with no spare capacity. Electricians price this risk in, and mid-job discoveries produce variation orders. If your home is 40+ years old and hasn't been rewired, an inspection first is money well spent — it converts unknowns into a priced list.
How long do common electrical jobs take?
Socket or switch replacement: 30 minutes. New light fixture: 30-60 minutes. New circuit to an appliance: 2-4 hours. Consumer unit/panel upgrade: half a day to a day. EV charger install: half a day. Full rewire of a 3-bedroom home: 3-10 days. Anything involving certification adds paperwork time — ask for the certificate before final payment.
What counts as an electrical emergency?
Burning smells from outlets or the panel, sparking, buzzing from the consumer unit, repeated breaker trips you can't isolate, and any exposed live wiring — switch off the affected circuit (or the main switch) and call an emergency electrician. A single dead outlet or a tripped breaker that resets and holds is a next-business-day job at standard rates.
How much does an EV charger installation cost?
A home EV charger install is typically half a day's work: mounting the unit, running a dedicated circuit from the panel, and adding protection devices. Total cost depends on the charger you buy, cable run distance, and whether your panel has spare capacity — a panel upgrade can double the project. In several countries this is notifiable/regulated work, and grants or utility rebates may apply — ask the installer.
How much does it cost to rewire a house?
Rewiring is priced per circuit or per property size and is one of the most invasive electrical jobs — walls are opened, and the house may be partly without power for days. Expect a multi-day job costing two to three orders of magnitude more than a service call. Get itemised quotes (per room or per point), and ask what wall-repair 'making good' is included, as that is where quotes diverge most.
How much does an electrician cost?
Electricians charge an hourly rate plus, often, a call-out or service fee covering travel and the first period on site. Small jobs (replace a socket, install a light fixture) are usually a minimum-charge visit; bigger jobs like panel upgrades or rewiring are quoted fixed. Batch small jobs into one visit — the minimum charge dominates the cost of single small tasks.
How much does an electrician cost in Australia?
Hourly rates average around $100 ($80-$130 range), with call-out fees of $70-$150. Emergency after-hours rates run $150-$300 per hour. Sydney is the most expensive market; regional areas add travel charges.
Can I legally change a light switch myself in Australia?
No. Australia prohibits virtually all DIY electrical work — replacing switches, sockets, or light fittings included (plug-in appliances and lamp bulbs are fine). Unlicensed work risks fines, voided insurance, and failed pre-sale inspections. It's strict by international standards, and it's real: use a licensed sparkie.
Free, no obligation. Sign in with Google to send your request.
How Handld works
- 1
Tell us what you need
Describe the job and where you are. It takes about a minute.
- 2
We match your request
Your request goes to local professionals who cover your area and service.
- 3
Compare quotes and choose
Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.
Electrician near Mount Waverley
- Electrician in Glen Waverley
- Electrician in Bentleigh East
- Electrician in Doncaster East
- Electrician in Noble Park
- Electrician in Rowville
- Electrician in Keysborough
- Electrician in Dandenong
- Electrician in Melbourne City Centre
- Electrician in Melbourne
- Electrician in Preston
- Electrician in City of Port Phillip
- Electrician in Reservoir