Electrician in Melbourne

Electrical is the wrong trade to shop on price alone: bad work hides inside walls, can void insurance, and is a fire risk that surfaces years later. A sane approach: verify the licence/registration first (non-negotiable), then compare 2-3 licensed quotes and choose on communication and scope clarity rather than the lowest number.

Clear access to the panel/consumer unit and the work areas, list every symptom (which outlets, when, what trips), and note the age of the property and any known previous electrical work. If you rent, get the landlord's approval first — in most countries electrical modifications are the landlord's call and often their cost.

For anything beyond a minimum-charge visit, yes — two or three. Insist each quote covers the same scope: number of points, certification included, chasing and making good walls, and parts brands. The cheapest quote often excludes certification or wall repair; the comparison only means something on identical scope.

Socket or switch replacement: 30 minutes. New light fixture: 30-60 minutes. New circuit to an appliance: 2-4 hours. Consumer unit/panel upgrade: half a day to a day. EV charger install: half a day. Full rewire of a 3-bedroom home: 3-10 days. Anything involving certification adds paperwork time — ask for the certificate before final payment.

Strongly recommended anywhere, and formalised in some countries (periodic inspection reports, compliance certificates at sale). An inspection typically costs a few hours of labour and reveals dangerous DIY history, degraded insulation, missing earthing, and undersized panels — exactly the defects that are expensive to discover after moving in. Use the report as a negotiation item.

Hourly rates average around $100 ($80-$130 range), with call-out fees of $70-$150. Emergency after-hours rates run $150-$300 per hour. Sydney is the most expensive market; regional areas add travel charges.

No. Australia prohibits virtually all DIY electrical work — replacing switches, sockets, or light fittings included (plug-in appliances and lamp bulbs are fine). Unlicensed work risks fines, voided insurance, and failed pre-sale inspections. It's strict by international standards, and it's real: use a licensed sparkie.