Plastering in Balfour
Compare local plastering and skimming pros in Balfour and get free quotes — no obligation, no call-backs you didn't ask for.
Typical price: ZAR 740–ZAR 12,900
Free, no obligation. Sign in with Google to send your request.
Plastering prices in Balfour
| Job size | Low | Typical | High |
|---|---|---|---|
| Patch repair Repair cracks or blown patches, ready for paint | ZAR 740 | ZAR 1,400 | ZAR 2,300 |
| Skim one room Skim walls of an average room | ZAR 2,300 | ZAR 3,700 | ZAR 6,000 |
| Full re-plaster one room Strip and re-plaster an average room | ZAR 4,600 | ZAR 7,800 | ZAR 12,900 |
How to hire a plastering pro in South Africa
- Ask for photos of finished painted walls — plaster quality varies hugely in SA's informal trade market
- Get a written quote separating labour and materials; agree who buys cement and plaster sand
- Check references or Kandua/Google reviews
- For damp walls, insist on fixing rising damp or leaks before re-plastering
- Agree on rubble removal in the price
- Ask about crack repair method (raking out and bonding) rather than smearing over
Plastering is unregulated in South Africa — no licence exists for the trade, so references and written quotes carry the weight. Most SA homes are plastered brick, and re-plastering after rising damp treatment is one of the most commonly quoted repairs.
Budgeting first?
See the full breakdown of what drives plastering prices — job sizes, unit rates, and how to save.
Frequently asked questions
How long does plaster take to dry before painting?
A skim coat is touch-dry in a day but needs roughly a week to fully dry before painting; full re-plaster can take several weeks depending on thickness, ventilation and season. Paint too early and you trap moisture, causing peeling. Use a mist coat (diluted emulsion) first.
Can you plaster over old plaster or paint?
Yes, if the substrate is sound — plasterers key the surface and use bonding agents. But blown (hollow-sounding), crumbling, or damp-stained plaster must come off first. A good plasterer taps the walls during the quote to check; be wary of anyone who doesn't.
Why is my new plaster cracking?
Fine crazing usually means the plaster dried too fast (heat, draughts) and is cosmetic — fill and paint. Straight-line cracks along boards or above doors indicate movement at joints. Wide or recurring cracks are worth a builder's inspection before redecorating.
Is plastering messy? How do I prepare the room?
It is one of the messiest trades — expect splatter, dust and high humidity. Empty the room if possible, or centre furniture under sheeting. Floors should be fully covered. Ask whether the quote includes protecting surfaces and cleaning up.
What is rendering versus plastering?
Rendering is exterior plastering with cement- or silicone-based mixes to protect and finish outside walls; plastering refers to interior walls with gypsum or cement finishes. Many plasterers do both, but exterior render is priced and scheduled differently (weather-dependent).
Why does plaster keep blowing off my SA brick walls near the floor?
Classic rising damp — older homes with failed or missing damp-proof courses wick ground moisture up the brickwork, and salts push the plaster off. Re-plastering alone fails; you need a DPC repair or injection first, then salt-resistant plaster.
Free, no obligation. Sign in with Google to send your request.
How Handld works
- 1
Tell us what you need
Describe the job and where you are. It takes about a minute.
- 2
We match your request
Your request goes to local professionals who cover your area and service.
- 3
Compare quotes and choose
Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.