Electrician near you in South Africa

A home EV charger install is typically half a day's work: mounting the unit, running a dedicated circuit from the panel, and adding protection devices. Total cost depends on the charger you buy, cable run distance, and whether your panel has spare capacity — a panel upgrade can double the project. In several countries this is notifiable/regulated work, and grants or utility rebates may apply — ask the installer.

For anything beyond a minimum-charge visit, yes — two or three. Insist each quote covers the same scope: number of points, certification included, chasing and making good walls, and parts brands. The cheapest quote often excludes certification or wall repair; the comparison only means something on identical scope.

Three usual causes: an overloaded circuit (too many high-draw appliances on one circuit), a short circuit (damaged cable or appliance), or an earth-leakage fault picked up by an RCD/GFCI — often a failing appliance or moisture ingress. Unplug everything on the circuit and reset; if it holds, plug things back one at a time to find the culprit. If it trips with nothing plugged in, call an electrician.

A straightforward swap on an existing, sound circuit is typically a minimum-charge visit of under an hour. Costs rise when the fixture is heavy (needs a rated box or bracing), ceilings are high (ladder or scaffold work), or the existing wiring turns out to be degraded. Buying the fixture yourself and paying labour-only is normal and usually cheapest.

It depends heavily on the country: some ban almost all DIY electrical work (Australia, New Zealand), others allow minor like-for-like swaps but restrict new circuits and consumer-unit work to registered electricians. Beyond legality, uncertified electrical work can void home insurance and surface as a problem when you sell. When in doubt, check your local rules before touching anything.

Hourly rates run R400-R800 with call-out fees of R450-R950. A CoC inspection runs R850-R2,500 depending on property size and faults found. Johannesburg and Cape Town are the most expensive markets.

A Certificate of Compliance certifies your electrical installation meets SANS 10142 standards. You legally need a valid one (not older than 2 years at transfer) when selling a property, and after any significant electrical alteration. Only registered electricians can issue it — and fixing the faults found is usually the real cost.