Flooring Installation in Eastern Cape

Waterproof materials: vinyl plank/tile, ceramic or porcelain tile, or specifically water-rated laminate. Standard laminate and solid wood swell when water gets into joints, so most installers will advise against them in wet rooms even if you like the look.

Laminate and click-lock vinyl plank are usually cheapest overall: low material cost plus a fast floating installation that needs no glue or nails. Sheet vinyl can be even cheaper per unit but needs a very flat subfloor. Carpet is comparable but is normally quoted by carpet fitters rather than hard-flooring installers.

Not always. Floating floors (laminate, click vinyl) can usually be laid over existing hard, flat surfaces like tile or old vinyl, which saves removal and disposal costs. Carpet always has to come out first. Overlaying raises the floor height, so doors may need trimming and thresholds adjusting — make sure the quote covers that.

Floating floors click together and rest on underlay — fastest and cheapest, standard for laminate and vinyl plank. Glue-down bonds each board or tile to the subfloor — more stable and quieter, common for vinyl tile and engineered wood. Nail-down fixes solid hardwood to a wooden subfloor — the most labour-intensive and most expensive. The method affects both price and which subfloors are suitable.

Installed laminate typically runs R250-R650 per m², vinyl plank R250-R700, and engineered wood R600-R1,500. Labour alone is commonly R80-R150 per m² for floating floors.

Vinyl plank handles moisture better and suits coastal humidity (Durban, Cape winter rain); laminate offers a harder surface at similar cost inland. Either way insist on a moisture barrier over slab floors — most local failures trace back to damp screed.