Electrician in Hammanskraal

A straightforward swap on an existing, sound circuit is typically a minimum-charge visit of under an hour. Costs rise when the fixture is heavy (needs a rated box or bracing), ceilings are high (ladder or scaffold work), or the existing wiring turns out to be degraded. Buying the fixture yourself and paying labour-only is normal and usually cheapest.

The panel (consumer unit, fuse board, DB board) distributes power to your circuits. Upgrades are needed when it uses obsolete fuses, lacks modern safety devices (RCD/GFCI/RCBO protection), trips constantly, or can't support new loads like an EV charger or induction range. It is regulated work in most countries and usually requires certification or inspection — budget for a licensed pro, never DIY.

Rewiring is priced per circuit or per property size and is one of the most invasive electrical jobs — walls are opened, and the house may be partly without power for days. Expect a multi-day job costing two to three orders of magnitude more than a service call. Get itemised quotes (per room or per point), and ask what wall-repair 'making good' is included, as that is where quotes diverge most.

Three usual causes: an overloaded circuit (too many high-draw appliances on one circuit), a short circuit (damaged cable or appliance), or an earth-leakage fault picked up by an RCD/GFCI — often a failing appliance or moisture ingress. Unplug everything on the circuit and reset; if it holds, plug things back one at a time to find the culprit. If it trips with nothing plugged in, call an electrician.

Strongly recommended anywhere, and formalised in some countries (periodic inspection reports, compliance certificates at sale). An inspection typically costs a few hours of labour and reveals dangerous DIY history, degraded insulation, missing earthing, and undersized panels — exactly the defects that are expensive to discover after moving in. Use the report as a negotiation item.

Socket or switch replacement: 30 minutes. New light fixture: 30-60 minutes. New circuit to an appliance: 2-4 hours. Consumer unit/panel upgrade: half a day to a day. EV charger install: half a day. Full rewire of a 3-bedroom home: 3-10 days. Anything involving certification adds paperwork time — ask for the certificate before final payment.

Hourly rates run R400-R800 with call-out fees of R450-R950. A CoC inspection runs R850-R2,500 depending on property size and faults found. Johannesburg and Cape Town are the most expensive markets.

A Certificate of Compliance certifies your electrical installation meets SANS 10142 standards. You legally need a valid one (not older than 2 years at transfer) when selling a property, and after any significant electrical alteration. Only registered electricians can issue it — and fixing the faults found is usually the real cost.