Water Heater Installation & Repair near you in United States
Known locally as water heater installation. Compare researched prices and get free quotes from pros wherever you are in United States.
Typical price: $150–$6,000
Free, no obligation. Sign in with Google to send your request.
What water heater installation & repair costs in United States
| Job size | Low | Typical | High |
|---|---|---|---|
| Element/thermostat repair Diagnose and replace failed element, thermostat or valve | $150 | $300 | $550 |
| Like-for-like tank replacement (40-50 gal) Supply and install standard gas or electric tank, code items included | $1,200 | $1,900 | $3,000 |
| Tankless conversion Gas tankless unit with venting and gas-line upsizing | $2,500 | $3,800 | $6,000 |
Full water heater installation & repair price guide for United States
Browse United States by region
How to hire a water heater installation & repair pro in United States
- Use a licensed plumber (and licensed electrician for new circuits); most jurisdictions require a permit for water heater replacement
- Confirm code items in the quote: expansion tank where required, pan and drain, seismic strapping (West Coast), and proper venting for gas
- Get unit, labor, permit, and old-unit disposal itemized
- Check ENERGY STAR heat-pump water heater incentives — many utilities offer significant rebates
- Verify gas work is by a licensed gas fitter with combustion/venting checks
- Register the manufacturer warranty (typically 6-12 years tank warranty)
Frequently asked questions
Is a leaking water heater dangerous?
A leaking tank can fail suddenly and flood, and any leak near electrics is hazardous. Shut off the unit's power (or gas) and its cold-water feed valve, then call a professional. A dripping pressure-relief valve specifically signals over-pressure or over-temperature — don't cap it.
Do water heaters need maintenance?
Yes: annual or biennial sediment flush, anode rod check every 2-3 years in hard-water areas, and TPR (pressure relief) valve testing. Tankless units need periodic descaling. Maintenance is the difference between an 8-year and a 15-year unit.
What size water heater does my home need?
Rule of thumb for storage: 30-40L per person per day of heated storage for typical use — a family of four lands around 150-200L (40-50 gal). For tankless, size by simultaneous outlets and the temperature rise your groundwater requires; your installer should calculate, not guess.
Why is my hot water running out faster than before?
Usually sediment buildup eating tank capacity, a failed lower heating element, or a broken dip tube mixing cold into the draw. All are diagnosable in one visit; sediment flushing and element swaps are routine repairs on a healthy tank.
How long does water heater installation take?
Like-for-like tank swaps take 2-4 hours. Fuel-type changes, relocations, tankless conversions, or units needing new circuits/venting run half a day to a full day plus possible permit inspections.
Are there US rebates for heat pump water heaters?
Frequently yes — many utilities and state programs offer hundreds of dollars off ENERGY STAR heat pump water heaters, and income-qualified electrification rebates exist in many states. Check your utility's marketplace before buying a standard electric tank; the running-cost gap is large.
Related services
Planning a budget?
See the full water heater installation & repair cost guide or browse all United States price guides.
Free, no obligation. Sign in with Google to send your request.