Flooring Installation in Serangoon New Town

Most quote by area (per square metre or square foot) for the installation itself, with fixed add-ons for prep, removal and trims. Very small jobs are often charged as a half-day or day minimum, so a tiny room can cost disproportionately more per unit of area.

Waterproof materials: vinyl plank/tile, ceramic or porcelain tile, or specifically water-rated laminate. Standard laminate and solid wood swell when water gets into joints, so most installers will advise against them in wet rooms even if you like the look.

Yes, noticeably. Setup, travel, tool time and material delivery are spread across a bigger area, and installers often discount larger jobs. Doing one room at a time is the most expensive way to floor a home and risks batch-colour differences between orders.

Ask how long they have fitted your specific material, whether they carry public liability insurance, who does subfloor prep and what it costs, how they handle door trimming and thresholds, their lead time, and what workmanship warranty they give in writing. Two or three quotes from local installers in Serangoon New Town is usually enough to see the fair market rate.

Solid hardwood can usually be sanded and refinished 2-3 times over its life, at a fraction of replacement cost. Engineered wood can typically take one light sanding if the top layer is thick enough. Replace when boards are cupped or rotten from water damage, or the wear layer is too thin to sand.

Ask every installer to itemise: material brand and wear-layer/thickness, underlay, subfloor prep, old floor removal and disposal, trims, beading and door thresholds, furniture moving, and waste allowance. The headline per-area rate is meaningless without those lines — most disputes come from prep and trims that one quote included and another did not.

Installed click vinyl typically runs S$4-S$12 per square foot depending on wear layer and brand, with S$6-S$9 the common mid-range. Laminate is similar; engineered wood runs roughly S$12-S$25 per square foot installed.

Overlay is much cheaper and faster: no HDB permit, no hacking labour, no debris disposal, and the flat stays liveable. Hacking is only necessary when existing tiles are hollow/popping, floor height is a problem, or you want tile or thick wood that needs a fresh screed.