Drywall Installation & Repair in Jurong Town

Small patch repairs (nail holes, door-knob dents) typically run the price of a 1-2 hour call-out, while larger holes or water-damaged sections cost more because they need cutting back to studs, new board, taping and up to three coats of joint compound. Whole-wall or ceiling replacement is priced per square metre or square foot.

If board has swollen, sagged, or grown mould it must be cut out and replaced — drying alone is not enough. Fix the leak first, cut back at least 30 cm beyond visible damage, and let the cavity dry before new board goes in. Persistent damp needs a moisture-meter check.

Hairline cracks at joints and above door frames are usually seasonal movement and are cosmetic. Wide (over 3 mm), diagonal, or recurring cracks, or cracks paired with sticking doors, can indicate settlement — get a builder or structural engineer to look before patching.

Even a small patch takes 2-3 visits or one long day, because joint compound needs drying time between coats. A typical patch is fill day one, sand and second coat day two, final sand and ready for paint day three. Quick-set compounds can compress this to one day for small jobs.

Look for pros in Jurong Town with recent photos of finished (painted) work, not just taped joints — finishing quality is where drywall jobs succeed or fail. Ask what finish level they quote (a Level 4 or 5 smooth finish costs more than a basic tape-and-fill) and whether sanding dust control is included.

Most HDB walls are reinforced concrete or masonry — tap them: concrete sounds solid, drywall hollow. Drywall repair applies mainly to partition walls and false ceilings added in renovations; concrete wall damage needs a plasterer instead.