Roofing in San Mateo
Compare local roofing contractor pros in San Mateo and get free quotes — no obligation, no call-backs you didn't ask for.
Typical price: ₱2,750–₱276,000
Free, no obligation. Sign in with Google to send your request.
Roofing prices in San Mateo
| Job size | Low | Typical | High |
|---|---|---|---|
| Leak / sheet repair Replace damaged sheets, reseal fasteners and flashings | ₱2,750 | ₱7,350 | ₱23,000 |
| Partial re-roof Replace one section of sheeting | ₱27,600 | ₱55,200 | ₱110,400 |
| Full re-roof (~100 m²) Strip and replace with pre-painted GI sheets | ₱73,600 | ₱138,000 | ₱276,000 |
How to hire a roofing pro in Philippines
- Schedule work in the dry season (roughly December-May), before typhoon season
- Specify the metal sheet gauge/thickness and coating (pre-painted GI is standard) in writing — thin sheets fail in typhoons
- Ask for wind-rated fastening details (screw type and spacing), not just 'yero installation'
- Building permits apply to structural work under the National Building Code; large contracts need PCAB-licensed contractors
- For labour-only arrangements, agree the per-m² labour rate and who buys materials
- Get a written scope with schedule and staged payments
Typhoon exposure makes wind-rated fastening and adequate sheet gauge the critical specification items in Philippine roofing. Building permits are required for structural work under the National Building Code, and larger contracts require PCAB-licensed contractors, though small repairs are commonly informal labour-only jobs.
Budgeting first?
See the full breakdown of what drives roofing prices — job sizes, unit rates, and how to save.
Frequently asked questions
How much does a new roof cost?
It scales with roof area, pitch, number of storeys, access, and material. Basic asphalt shingle or concrete tile sits at the bottom of the range; metal, slate and clay cost two to four times more. Tear-off of the old covering, disposal, scaffolding or edge protection, and hidden deck repairs are the lines that move a quote most — make sure all four are priced before comparing.
When is the best time of year to replace a roof?
Dry, settled weather — and before your region's storm or rainy season, not after it starts. Roofers book out weeks or months ahead of peak season, so schedule inspections early; shoulder-season slots are often cheaper and easier to get.
What is flashing and why do most leaks start there?
Flashing is the metal detailing that seals joints — around chimneys, valleys, vents, skylights and wall junctions. These joints move and collect water flow, so flashing fails long before the main covering. If a roofer proposes reusing old flashing on a full replacement, push back.
How long does a roof replacement take?
A straightforward single-family roof takes 1-3 days for asphalt shingles or metal sheeting, and up to 1-2 weeks for tile, slate or complex multi-plane roofs. Weather delays are normal — a competent crew will never strip more roof than they can waterproof the same day.
How much does roofing cost in the Philippines?
Re-roofing with pre-painted GI sheets typically runs ₱800-₱2,600 per m² for materials plus labour, with labour alone at ₱150-₱500 per m². A full re-roof of a 100 m² home commonly lands at ₱80,000-₱300,000 depending on gauge, insulation and structure.
When should I schedule roof work in the Philippines?
In the dry months, roughly December to May. Typhoon season (June-November) both causes the damage and makes repair scheduling unreliable — and post-typhoon demand spikes push prices up and quality down. Pre-season inspection is the cheap option.
Free, no obligation. Sign in with Google to send your request.
How Handld works
- 1
Tell us what you need
Describe the job and where you are. It takes about a minute.
- 2
We match your request
Your request goes to local professionals who cover your area and service.
- 3
Compare quotes and choose
Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.