Water Heater Installation & Repair in Wellington

Storage tanks: 8-12 years (longer with soft water and anode-rod changes). Tankless/instantaneous units: 15-20 years with descaling. Heat pump water heaters: 10-15 years. A tank leaking from the shell itself is end-of-life — replace, don't repair.

Usually sediment buildup eating tank capacity, a failed lower heating element, or a broken dip tube mixing cold into the draw. All are diagnosable in one visit; sediment flushing and element swaps are routine repairs on a healthy tank.

A leaking tank can fail suddenly and flood, and any leak near electrics is hazardous. Shut off the unit's power (or gas) and its cold-water feed valve, then call a professional. A dripping pressure-relief valve specifically signals over-pressure or over-temperature — don't cap it.

Like-for-like tank swaps take 2-4 hours. Fuel-type changes, relocations, tankless conversions, or units needing new circuits/venting run half a day to a full day plus possible permit inspections.

Yes: annual or biennial sediment flush, anode rod check every 2-3 years in hard-water areas, and TPR (pressure relief) valve testing. Tankless units need periodic descaling. Maintenance is the difference between an 8-year and a 15-year unit.

An unrestrained 180L cylinder is ~200kg of water that tears free in a quake, ripping out pipes and flooding the house on top of the damage. Building Code guidance requires strapping to structure — a cheap line item your installer should include by default.