Roofing in Manawatu-Wanganui

Yes, over time — moss holds moisture against the surface, lifts tile and shingle edges, and accelerates frost damage. Have it removed by soft washing or manual scraping, never high-pressure washing, which strips granules and forces water under the covering. Zinc or copper strips slow regrowth.

Repair when damage is localised — a few slipped tiles, one flashing leak — and the roof is under about two-thirds of its expected life. Replace when leaks recur in different places, more than roughly 30% of the covering is failing, or repair quotes start approaching a third of replacement cost. A good roofer will show you photos from the roof to justify either answer.

Sometimes — an overlay saves tear-off cost but hides deck problems, adds weight, and often shortens the new roof's life and warranty. Many codes and manufacturers limit roofs to two layers. Tear-off costs more upfront and is usually the better long-term decision; get both options priced.

Access and safety costs (scaffolding, edge protection), roof pitch and height, tear-off vs overlay, material grade, and how honestly hidden deck repair is priced. A low bid that excludes safety equipment and deck contingency isn't cheaper — it's just billed later.

Often worth it: the access equipment is already up, edge details integrate cleanly, and combined pricing beats two separate jobs. If your gutters are under ten years old and sound, keep them — but have the roofer protect them during tear-off and note their condition in writing.

Long-run steel — the most common covering — typically runs NZD $90-$190 per m² installed, putting a small home at $12,000-$28,000 and larger houses at $20,000-$45,000 including scaffolding. Concrete tile and membrane roofs price similarly to slightly higher.

Usually not — replacing the covering like-for-like is exempt work. Consent is needed if you change the roof structure, alter the profile substantially, or switch to a much heavier material. Your roofer or council can confirm in minutes.