Fence Installation & Repair in Invercargill

Ask for photos of recent fences in Invercargill and, ideally, an address you can drive past — fencing quality shows in post-setting and line, which you can see. Confirm they handle the permit/boundary check and get the length, material and gate count in writing before booking.

An itemized quote lists: fence type and height, total length, number and type of gates, post material and setting method (concrete vs driven), removal and disposal of the old fence, and whether the price is per linear unit or a lump sum. A one-number quote with no length or material is impossible to compare.

A standard residential run takes one to three days: posts set in concrete need to cure, so many installers do posts one day and panels the next. Rocky or sloped ground, many gates, or removing an old fence all add time. Wet weather that stops concrete curing is the usual delay.

Height limits and permit rules vary by locality, and front-boundary fences are often more restricted than rear ones. Corner lots, heritage areas and pool fences have their own rules. Check local height limits and whether a permit is needed before you commit — retrofitting a too-tall fence is expensive.

Boundary responsibility depends on your deeds/title, not a universal rule — often each owner maintains one side, or costs are shared for a jointly-owned fence. Talk to your neighbour and check your title before building on a boundary; disputes over line and cost-sharing are the most common fencing headache.

Replace a few rotten posts or panels and repair wins on cost. But once a third or more of the posts are failing, the fence is leaning, or the timber is widely rotten, patch repairs become throwing good money after bad — a full replacement is usually cheaper per year of life.

Installed cost runs roughly NZD 80-200 per metre depending on material, with a typical backyard commonly NZD 3,000-8,000. Under the Fencing Act you usually share the cost of a reasonable boundary fence with your neighbour.