Door Installation & Repair in Auckland

In many countries, yes in specific spots — typically between an attached garage and the house, and in multi-storey or rental configurations. Fire doors must be fitted with the right frame, seals, closers and gaps to actually work, so use an installer who knows the local requirement rather than treating it as just another door.

Houses move and hinges wear: the classic faults are a sagging hinge, a swollen door in humid seasons, or a latch misaligned with its strike plate. All are quick fixes for a carpenter. A door that suddenly sticks along with wall cracks can signal settlement worth a builder's look.

For interior doors in Auckland, a finish carpenter or experienced handyman is the right trade; for exterior and security doors look for installers who talk about weather seals, thresholds and lock alignment unprompted. Photos of finished margins (the even gap around the door) are the quality tell.

A solid-core or engineered door, a quality deadlock or multipoint lock, reinforced strike plates with long screws into the stud, and hinge-side protection. Ask for locks meeting your country's recognized security standard — insurers often specify them and it's the cheapest discount you'll ever earn.

The door-set spec (material, glazing, security rating), removal and disposal of the old door, fitting and sealing, threshold work, all hardware including the lock cylinder, and making good of trims both sides. Cheap quotes commonly exclude hardware and making-good — ask.

An interior door in a good frame takes 1-2 hours for a pro; a slab needing hinge and lock cuts takes 2-4. Exterior door-sets take half a day to a day including sealing and hardware. Multi-panel sliding or bifold sets are usually a full day with two people.

A slab is just the door leaf — cheapest, but the installer must cut hinges and the lock to match your existing frame. A prehung/door-set arrives already hinged in its frame — dearer, but the fit and seal are better, and it's the sensible choice when the old frame is worn or out of square.

Hanging an internal door typically runs $120-250 labour; external door-set replacement lands $900-2,500 installed. Aluminium sliding door roller repairs — a common Kiwi job — run $150-350 per panel.