Countertop Installation near you in New Zealand

Quartz (engineered stone) is non-porous, consistent in colour and needs no sealing; granite is natural, each slab unique, and needs periodic sealing. Both are hard-wearing at similar price points. Choose quartz for low maintenance and uniform looks, granite for natural variation and heat resistance.

Look for: material and thickness, templating (a precise measure of your cabinets), fabrication (cut-outs for sink and hob, edge profile), delivery, installation, sealing if natural stone, and removal/disposal of the old top. A slab-only price hides the fabrication and fitting that make up much of the cost.

Yes — a templater measures your installed cabinets exactly (often with a laser) so the stone is cut to fit precisely. It happens after cabinets are in and before fabrication. Skipping proper templating is how you end up with gaps, bad seams and misaligned cut-outs.

After templating, fabrication takes about one to two weeks for stone; installation itself is usually a day. Plan for the gap between template and fit — you'll be without a worktop briefly, so coordinate with the rest of the kitchen work.

Quartz and sintered surfaces just need wiping; avoid excessive heat and harsh abrasives. Natural granite and marble need periodic sealing and are more stain-sensitive (marble especially). Ask the installer for material-specific care instructions and how often to reseal.

Dry-cutting engineered (quartz) stone releases silica dust that causes silicosis, a serious lung disease — which is why fabrication must use wet-cutting and proper controls. This is a real, regulated workplace hazard; reputable fabricators take it seriously (see country notes).

Cost is driven by material and area. Laminate is cheapest; granite and quartz sit in the middle; premium natural stone and sintered surfaces are dearest. Priced per square foot/metre or linear metre installed, with templating, cut-outs (sink, hob), edging and removal of the old top usually on top.

Stone benchtops commonly run NZD 500-1,400 per m² supplied and fitted; a typical kitchen lands at NZD 3,500-11,000 depending on material and island. Laminate is far cheaper.