Handld.org

How much does tv mounting cost in New Zealand?

Low NZ$90
Typical NZ$150
High NZ$700
Get quotes from tv mounting pros — free, no obligation

Free, no obligation. Sign in with Google to send your request.

Key takeaways

  • Most tv mounting jobs in New Zealand land between NZ$90–NZ$700 — known locally as tv wall mounting.
  • TV mounting is unregulated in New Zealand, but adding or extending a power point is restricted electrical work that must be done by an electrician registered with the Electrical Workers Registration Board (EWRB). GIB plasterboard walls make stud-fixing essential for larger TVs, particularly given seismic loading.
  • Prices below are researched national ranges, updated July 2026 — not quotes.

TV Mounting prices by job size in New Zealand

Researched national ranges in NZD, updated July 2026.
Job size Low Typical High
Small TV under 43" on GIB plasterboard Fixed or tilting bracket into studs NZ$90 NZ$150 NZ$250
Standard TV 43-65" Stud wall, basic cable management NZ$120 NZ$200 NZ$330
Large TV 65"+ or full-motion bracket Articulating arm, two-person lift NZ$180 NZ$280 NZ$460
Cable concealment + electrician power point In-wall low-voltage run plus registered electrician outlet NZ$250 NZ$400 NZ$700
Brick or concrete install Masonry anchors, surface duct for cables NZ$200 NZ$330 NZ$550

Per-unit rates

Typical tv mounting rates in New Zealand.
Unit Low Typical High
per TV (flat rate) NZ$100 NZ$180 NZ$330

What affects the price

  • Job size and scope — bigger or more complex jobs move you up the ranges above.
  • Access and condition — hard-to-reach areas, older properties or neglected maintenance add labour time.
  • Materials and quality level — where materials are involved, the grade you choose often matters more than labour.
  • Urgency — same-day or out-of-hours work usually carries a premium.
  • Where you live — large metros in New Zealand typically run above the national range; smaller towns below it.

How to save

  • Get at least three quotes and compare like-for-like scopes, not just totals.
  • Be flexible on timing — off-peak slots are often cheaper.
  • Bundle related tasks into one visit to spread call-out costs.
  • Agree the scope in writing up front to avoid change-order surprises.

How to hire a tv mounting pro in New Zealand

  1. Confirm wall type — NZ homes are mostly plasterboard (GIB) on timber studs, with some brick veneer and concrete apartments
  2. Check reviews on Builderscrack, NoCowboys, or Google that mention TV size and wall type
  3. Ask for public liability insurance before booking
  4. A new power point behind the TV must be installed by a licensed electrician registered with the EWRB — most fixed wiring is not DIY-legal
  5. Agree the flat all-in price including bracket and cable concealment
  6. In earthquake-prone areas, ask for stud fixing rather than hollow-wall anchors for any TV over 43 inches

Red flags

  • Offers to wire a new power point without an EWRB-registered electrician
  • Hollow-wall anchors proposed for a large TV on GIB board
  • No insurance or written quote
  • Price jumps on arrival for concrete walls
  • No workmanship guarantee

How Handld researches prices

These are researched estimates, not quotes and not our transaction data. We compile ranges from published sources — national statistics, trade bodies and incumbent cost guides — normalise them to NZD, and adjust city pages by a population-based cost tier. Last updated July 2026. Basis: Extrapolated from AU Airtasker/hipages rates at NZD parity and NZ handyman rates $60-$95/hr; Builderscrack category norms.

Frequently asked questions

Do I need an electrician for TV mounting?

Not for the mounting itself. You need one only if you want a new power outlet behind the TV, since fixed wiring is electrician-only work in most countries. Many TV mounting companies partner with an electrician or offer the outlet as an add-on — ask when booking so it happens in one visit.

What happens if the installer damages my wall or the TV falls?

A professional installer should carry public liability insurance that covers wall damage and a dropped or fallen TV. Ask for proof before booking, and ask whether they guarantee their fixings (many offer 12 months or lifetime on workmanship). Keep the receipt — home insurance claims for fallen TVs often hinge on showing it was professionally installed.

How long does TV mounting take?

A standard install on a stud or masonry wall takes 30-90 minutes. Add 1-2 hours if cables are being concealed inside the wall, and more again for above-fireplace installs or walls that need reinforcement. Book a 2-hour window to be safe.

Can a TV be mounted on a brick or concrete wall?

Yes — brick and concrete are actually stronger than drywall for mounting. The installer uses a hammer drill and masonry anchors (sleeve or wedge anchors). It costs more than a stud wall because drilling is slower and cable concealment usually has to run in surface trunking rather than inside the wall.

Can I mount a TV in a rental apartment?

Usually only with the landlord's written permission, since mounting leaves 4-6 anchor holes. Many tenancy agreements class it as an alteration. Alternatives that need no drilling: a TV floor stand, or a heavy-duty easel-style mount. If you do get permission, keep the mount and ask the installer to patch holes when you move out — it is a quick filler-and-paint job.

Can a soundbar or games console be installed at the same time?

Yes, and it is cheaper to bundle than to book twice. Soundbar brackets attach either to the wall below the TV or to the TV mount itself. Consoles and set-top boxes go on a small floating shelf or behind-TV bracket. Expect a modest add-on charge per extra device, plus cable management for each.

Does earthquake risk change how TVs should be mounted in NZ?

Yes — installers in NZ should always fix into timber studs (or masonry) rather than relying on hollow-wall anchors in GIB board, and full-motion arms should be rated well above the TV's weight. For rentals and quake-prone regions, safety straps on the TV base are a cheap extra safeguard.

Who can add a power point behind the TV in New Zealand?

Only an EWRB-registered electrician may add or shift a power point. Limited homeowner DIY exemptions exist in NZ but do not cover work most people should attempt, and non-compliant wiring can void house insurance. Most TV installers bundle a registered sparky visit as an add-on.

Compare tv mounting quotes in New Zealand

Free, no obligation. Sign in with Google to send your request.

Related price guides

Hire a tv mounting pro