Aircon Servicing & Repair in Whanganui

You can safely wash or replace filters monthly, keep the outdoor unit clear of leaves and debris, and wipe the indoor casing. Anything involving the refrigerant circuit, electrical components, or coil chemicals should be left to a certified technician — refrigerant handling is legally restricted in most countries.

A standard clean-and-check takes 30-45 minutes per indoor unit. A chemical wash takes about an hour per unit, and a full chemical overhaul (where the unit is dismantled) takes 1.5-2 hours per unit. Multi-unit visits are faster per unit.

Once a year is the minimum for a system used seasonally; every 3-4 months if you run it daily in a hot climate. Regular servicing keeps coils and filters clean, which protects the compressor — the most expensive part to replace — and keeps energy use down.

Pricing depends on the service depth: a basic clean-and-check per unit is the cheapest, a chemical wash costs roughly double, and a full overhaul double again. Multi-unit discounts are standard. Get the per-unit rate and what is included in writing before booking — see the national price ranges on this page as a baseline.

A musty smell means mould or bacteria on the evaporator coil or in the drain pan — fixed with a chemical wash. A burning smell can be dust on a heater element or a failing motor and is worth an inspection. A vinegar-like or chemical smell can indicate a refrigerant leak; turn the unit off and call a technician.

A standard single-unit service is typically $120-$250, with multi-unit discounts. Deep hygiene cleans of mouldy indoor units run $200-$350. Winter is peak season in NZ since heat pumps are primarily used for heating — book a service in autumn.

Under the Healthy Homes Standards, rentals must have fixed heating capable of heating the main living room, which is often a heat pump — and the landlord is responsible for keeping it in working order. Tenants should clean filters and report faults in writing.