Paving & Driveways in Miri

Driveway cost depends on area, material (asphalt, concrete, block/brick pavers, gravel, resin) and how much excavation and sub-base work is needed. Gravel is cheapest, asphalt and plain concrete mid-range, and block paving or resin-bound surfaces the most expensive per square metre. Quotes should always include excavation, sub-base depth and edging.

A typical residential driveway takes 2-5 days: excavation and sub-base first, then the surface. Asphalt is drivable within days; new concrete should cure about a week before taking a car's weight; pavers can be used almost immediately once compacted and sanded.

Often yes — asphalt can be overlaid if the base is sound, concrete can sometimes be resurfaced or used as a base for pavers, and sunken block paving can be lifted and relaid on fresh bedding. If the base has failed (widespread cracking, deep ruts), resurfacing only buys a year or two.

Yes — water must drain to a lawful outfall or soak into the ground. Many jurisdictions now require permeable paving or on-site soakaways when front gardens are paved, precisely to stop rain sheeting onto the street. A good contractor designs falls and drainage before laying anything.

Yes. 'We have leftover asphalt from a job down the road' is a classic scam — the material is often laid thin over no base and fails within months, and the crew is untraceable. Reputable paving firms price from a site visit and written spec, not from surplus material on a truck.

Roughly RM6-15 per sq ft installed for standard interlocking pavers or plain concrete, with granite, stamped concrete and premium pavers above that. A typical double-car porch lands around RM4,000-12,000 depending on finish.