How much does concrete work cost in Malaysia?
Free, no obligation. Sign in with Google to send your request.
Key takeaways
- Most concrete work jobs in Malaysia land between MYR 300–MYR 28,000 — known locally as concrete works.
- Small residential concrete works in Malaysia are generally unregulated within the property boundary, while structural works fall under UBBL (Uniform Building By-Laws) and local council approval. Concrete grades are quoted as G20/G25/G30 and should appear in writing.
- Prices below are researched national ranges, updated July 2026 — not quotes.
Concrete Work prices by job size in Malaysia
| Job size | Low | Typical | High |
|---|---|---|---|
| Repair / patch Patch cracks and spalled areas | MYR 300 | MYR 800 | MYR 1,500 |
| Slab or porch Reinforced slab for porch or patio | MYR 3,000 | MYR 6,000 | MYR 12,000 |
| Driveway slab Full-depth reinforced driveway | MYR 8,000 | MYR 15,000 | MYR 28,000 |
Per-unit rates
| Unit | Low | Typical | High |
|---|---|---|---|
| per sq ft (flatwork, installed) | MYR 5 | MYR 8 | MYR 13 |
What affects the price
- Job size and scope — bigger or more complex jobs move you up the ranges above.
- Access and condition — hard-to-reach areas, older properties or neglected maintenance add labour time.
- Materials and quality level — where materials are involved, the grade you choose often matters more than labour.
- Urgency — same-day or out-of-hours work usually carries a premium.
- Where you live — large metros in Malaysia typically run above the national range; smaller towns below it.
How to save
- Get at least three quotes and compare like-for-like scopes, not just totals.
- Be flexible on timing — off-peak slots are often cheaper.
- Bundle related tasks into one visit to spread call-out costs.
- Agree the scope in writing up front to avoid change-order surprises.
How to hire a concrete work pro in Malaysia
- Use SSM-registered contractors; CIDB registration applies to larger construction works
- Get thickness, mix grade (G20-G30) and mesh (BRC) in the written quote
- Confirm compacted base and curing plan for the tropical heat
- For porch slabs, spec 100mm+ with BRC mesh for vehicle loads
- Confirm drainage falls into monsoon drains
- Ask for past-work photos and references
Red flags
- No BRC mesh for a vehicle slab
- No curing after the pour
- Full payment upfront
- No company registration
How Handld researches prices
These are researched estimates, not quotes and not our transaction data. We compile ranges from published sources — national statistics, trade bodies and incumbent cost guides — normalise them to MYR, and adjust city pages by a population-based cost tier. Last updated July 2026. Basis: Recommend.my cost guides; Malaysian ready-mix supplier rates.
Frequently asked questions
What finishes can concrete have?
Broom (non-slip, standard outdoors), steel trowel (smooth, indoor), exposed aggregate, stamped/patterned, coloured and polished. Decorative finishes can add 30-100% to the base rate but replace the cost of a separate surface like pavers or tiles.
Why did my concrete crack, and is it a defect?
Hairline shrinkage cracks are normal; that is what control joints are for — they give cracking a straight place to happen. Wide, uneven or lifting cracks signal a base, reinforcement or curing problem. If a new slab cracks outside its joints within months, call the contractor back.
How much does concrete work cost?
Concrete is priced by area and thickness for slabs (per m² or sq ft), by volume for supply (per cubic metre/yard), and by the job for repairs. The concrete itself is often less than half the bill — formwork, reinforcement, sub-base preparation, finishing and access drive the labour cost.
What should a concreting quote include?
Excavation and sub-base, formwork, reinforcement (mesh size or fibre dose), concrete grade and thickness, the finish (broom, trowel, exposed aggregate, stamped), control joints, curing method, and spoil removal. Any quote that just says 'supply and lay concrete' leaves too much undefined.
How long does concrete take to cure?
You can usually walk on it after 24-48 hours, drive on it after about 7 days, and it reaches design strength at 28 days. Curing (keeping it damp, protecting from frost or extreme heat) in the first week matters more for durability than almost anything else.
What does concreting cost in Malaysia?
All-in flatwork typically runs RM5-12 per sq ft depending on thickness and finish, with ready-mix supply around RM220-280 per m³. A standard double car-porch slab lands roughly RM4,000-10,000.
Free, no obligation. Sign in with Google to send your request.