Flooring Installation in Sandakan

Vinyl plank (LVP/LVT) is fully waterproof, so it is the safer choice for kitchens, bathrooms and laundries, and it is quieter underfoot. Laminate has a harder, more scratch-resistant wear surface and often looks more like real wood, but standard laminate swells if water sits on it. Prices overlap heavily, so choose by room use rather than price.

A single room in click-lock laminate or vinyl is typically done in a day. A whole apartment or house takes 2-5 days depending on area, furniture moving, and how much old flooring must come out. Add a day or more if the subfloor needs levelling compound, and 2-3 days of acclimatisation before wood products are laid.

Not always. Floating floors (laminate, click vinyl) can usually be laid over existing hard, flat surfaces like tile or old vinyl, which saves removal and disposal costs. Carpet always has to come out first. Overlaying raises the floor height, so doors may need trimming and thresholds adjusting — make sure the quote covers that.

Subfloor prep means making the base flat, dry and sound: self-levelling compound over uneven concrete, replacing damaged boards or plywood, and adding a moisture barrier over slabs. Skipping it causes clicking joints, gaps and premature wear, and it voids most manufacturer warranties. It is normally priced separately per area, so ask every installer to inspect and price it before you compare quotes.

Yes. Solid and engineered wood (and to a lesser degree laminate) should sit in the room where it will be installed for 48-72 hours so it adjusts to local temperature and humidity. Skipping this step is a common cause of gapping and buckling months later. A good installer will schedule delivery a few days before fitting.

Floating floors click together and rest on underlay — fastest and cheapest, standard for laminate and vinyl plank. Glue-down bonds each board or tile to the subfloor — more stable and quieter, common for vinyl tile and engineered wood. Nail-down fixes solid hardwood to a wooden subfloor — the most labour-intensive and most expensive. The method affects both price and which subfloors are suitable.

Vinyl click flooring typically runs RM4-RM10 per square foot installed (materials around RM3.50-RM5.50 plus labour), laminate RM5-RM12, and solid or engineered timber RM12-RM30. Watch the wear layer — 0.3mm+ is the sensible minimum for homes.

Not for overlaying vinyl or laminate in most cases. Condos require management approval and a refundable renovation deposit; local-council (DBKL/MBPJ etc.) permits apply to structural renovations, not floor coverings.