Bricklaying & Masonry in Putra Heights

A skilled bricklayer lays roughly 300-600 standard bricks a day on straightforward wall runs — fewer on detailed work, arches, or restoration. That is why fiddly small jobs cost more per brick than long straight walls.

Repointing — grinding out failed mortar joints and refilling them — is priced per square metre and needed when mortar crumbles, washes out, or lets damp through. It is far cheaper than rebuilding, but matching the mortar mix and joint style to the original is what separates good work from patchwork.

Yes — a concrete footing sized to the wall's height and the soil. Retaining walls also need drainage behind them (weep holes, gravel backfill) or water pressure will crack or topple them. Most retaining-wall failures trace to missing drainage, not weak bricks.

Rules vary, but retaining walls above roughly 0.6-1m, boundary walls above fence-height limits, and anything structural typically need approval and sometimes an engineer's design. A bricklayer in Putra Heights should know the local threshold — if they say approval never applies, get a second opinion.

Stepped cracks along mortar joints usually mean foundation movement; vertical cracks through bricks suggest thermal movement or missing expansion joints; horizontal cracking on retaining walls means soil pressure. Small hairline cracks can be monitored, but widening or stepped cracks deserve a structural opinion before cosmetic repair.

Usually, with effort — reclaimed bricks, brick-matching services and tinted mortars get close. An exact match matters most on street-facing walls; ask to see a sample panel before committing, since a bad match is permanent and obvious.

Built-and-plastered brick walls typically run RM50-90 per m² of wall, and a standard boundary wall about RM250-450 per linear metre at 1.5-1.8m height including footing.