Bathroom Renovation in Pelentong

Around 10-20% is normal, sometimes more where custom vanities or imported fittings must be ordered up front — in that case pay the supplier invoice share, not a round 50%. Hold 5-10% back until the room has been used for a week or two and the snag list (grout gaps, silicone, door alignment) is closed.

Run every fixture: check drainage speed, look under the vanity for weeps, confirm the shower floor falls to the drain (pour a bucket and watch), check grout lines are even and silicone is continuous, and test the extractor fan. Photograph everything and get the waterproofing product and warranty terms in writing before releasing final payment.

A straight swap-in-place refit takes about 1-2 weeks; a full renovation with new waterproofing, retiling, and any layout change takes 2-4 weeks. Add waiting time before the start for fixture delivery and trades scheduling — and note that waterproofing membranes need curing days you cannot compress.

If the renovation strips the shower area back to the substrate, waterproofing must be redone — a failed membrane is the most expensive bathroom defect there is, because the fix means demolishing finished tiling. Several countries regulate wet-area waterproofing explicitly. Never let a contractor tile directly over an old or damaged membrane.

2025-26 guides put basic upgrades at RM5,000-RM15,000 and mid-range remodels roughly RM15,000-RM40,000, with premium projects reaching RM55,000-RM90,000. Tiling runs RM10-30 per sq ft plus RM5-15 per sq ft for waterproofing.

Yes — the JMB or management corporation must approve the works, typically with a refundable renovation deposit, contractor registration at the guardhouse, and restricted working hours. Landed-home internal refits need no council permit unless walls or drainage change.