Bathroom Renovation in Kampung Kangkar Teberau

It can work on sound, well-bonded wall tiles and saves strip-out cost, but it fails on floors with movement, adds thickness that fouls doors and fittings, and hides the condition of the substrate and membrane. Most renovators strip back in wet areas — if a contractor proposes tile-over-tile in the shower zone specifically, treat it as a cost-cutting red flag.

If the renovation strips the shower area back to the substrate, waterproofing must be redone — a failed membrane is the most expensive bathroom defect there is, because the fix means demolishing finished tiling. Several countries regulate wet-area waterproofing explicitly. Never let a contractor tile directly over an old or damaged membrane.

Around 10-20% is normal, sometimes more where custom vanities or imported fittings must be ordered up front — in that case pay the supplier invoice share, not a round 50%. Hold 5-10% back until the room has been used for a week or two and the snag list (grout gaps, silicone, door alignment) is closed.

Only in limited ways. Swapping a vanity, toilet, or taps in place works as standalone jobs, but anything touching the shower area, waterproofing, or tiling should be done in one hit — redoing tiles twice or breaking a waterproof membrane to add something later costs more than doing it together.

2025-26 guides put basic upgrades at RM5,000-RM15,000 and mid-range remodels roughly RM15,000-RM40,000, with premium projects reaching RM55,000-RM90,000. Tiling runs RM10-30 per sq ft plus RM5-15 per sq ft for waterproofing.

Yes — the JMB or management corporation must approve the works, typically with a refundable renovation deposit, contractor registration at the guardhouse, and restricted working hours. Landed-home internal refits need no council permit unless walls or drainage change.