Pressure Washing in Dublin

Renting a machine costs a fraction of a pro visit, but consumer machines are slower, and the main risks are damage (etched concrete, stripped paint) and injury — a 3000+ PSI jet can cut skin. DIY makes sense for a small, flat concrete area. Hire a pro for two-storey walls, roofs, timber, render, or anything needing ladders or chemicals.

Safe at high pressure: concrete, block paving, natural stone (with care), brick in good condition, metal fences and gutter exteriors. Needs low pressure or soft washing: painted surfaces, render, timber decking, vinyl or fibre-cement siding, roofs, and old or repointed brickwork. Never pressure wash: single-glazed windows at close range, electrical fittings, or asbestos-containing materials.

Four things drive the spread: surface area and condition (heavy staining doubles the time), access (upper storeys, tight side passages), method (soft washing with chemicals costs more than a quick rinse), and what is bundled (resealing, weed treatment, gutter clear-out). A cheap quote is often just a rinse with no pre-treatment — clarify the scope before comparing numbers.

Yes. Too much pressure or the wrong nozzle can etch concrete, blast mortar out of brick joints, splinter timber decking, strip paint, and force water behind siding or render. Roof tiles are especially vulnerable. Ask the pro what PSI and nozzle they plan to use per surface, and whether they soft wash delicate areas.

A standard cobblelock or concrete driveway typically runs €100-€300 depending on size and condition, with re-sanding of joints sometimes quoted separately at €50-€100. Full house exterior washes run €250-€700.

Ireland's wet climate means moss and algae return within 12-18 months on most driveways. An annual wash with a biocide treatment holds surfaces the longest; skipping the treatment usually halves the time before regrowth.