Tiling in Hong Kong
Compare local tiling (泥水 works) pros in Hong Kong and get free quotes — no obligation, no call-backs you didn't ask for.
Typical price: HK$2,300–HK$80,500
Free, no obligation. Sign in with Google to send your request.
Tiling prices in Hong Kong
| Job size | Low | Typical | High |
|---|---|---|---|
| Kitchen backsplash Tile a standard backsplash, tiles excluded | HK$2,300 | HK$4,000 | HK$6,900 |
| Bathroom floor retile Hack and retile a bathroom floor with waterproofing | HK$9,200 | HK$17,300 | HK$28,700 |
| Full bathroom retile Hack, waterproof, flood test and retile floor plus walls | HK$34,500 | HK$51,700 | HK$80,500 |
How to hire a tiling pro in Hong Kong
- Tiling falls under 泥水 (wet trades) in HK renovation quotes — confirm the master's tiling portfolio specifically
- Register works with building management; hacking tiles is restricted to permitted hours
- Confirm waterproofing redo and a flood test for bathroom floors
- Get quotes per sq ft with hacking, disposal and screed itemized
- Licensed disposal of construction waste is required — confirm it's in the price
- Check platform reviews (HKDecoman, Toby)
Bathroom re-tiling in Hong Kong flats is non-structural and outside Buildings Department approval, but building management imposes registration, deposits and hacking-hours rules. Waterproofing failures cause inter-flat seepage disputes handled by the FEHD/BD Joint Office, so a flood test before tiling is standard good practice.
Budgeting first?
See the full breakdown of what drives tiling prices — job sizes, unit rates, and how to save.
Frequently asked questions
How much does tiling cost?
Tilers price labour per square metre (or square foot), with tiles, adhesive, grout and prep on top. Small-format ceramic on a flat floor is the base rate; large-format porcelain, natural stone, mosaics, herringbone patterns and wall work all cost more per unit because they are slower and less forgiving.
How much does it cost to remove old tiles?
Removal is priced per square metre and depends on what's underneath: tiles on board come off fast, tiles on thick sand-cement beds are slow, noisy demolition work. Budget for substrate repairs after removal — you rarely know the wall or floor condition until tiles are off.
Why are my new tiles cracking or coming loose?
Almost always substrate or installation, not the tile: movement in the floor, missing expansion joints, adhesive coverage too thin (spot-dabbing), or tiling over a drummy layer. Cracked single tiles from impact are replaceable if you kept spares — always keep a box.
How long does tiling a bathroom take?
A full bathroom (floor plus walls) typically takes 3-5 days: prep and waterproofing first, then setting, then grouting after the adhesive cures. Add days if old tiles must come off or the substrate needs levelling. Rushing cure times is the classic cause of cracked grout later.
How do I find a good tiler in Hong Kong?
Ask tilers in Hong Kong for photos of finished wet rooms and floor-to-wall junctions — lippage (uneven tile edges), crooked grout lines and bad cuts around fittings are where cheap work shows. Good tilers also talk about substrate prep and waterproofing before they talk about tiles.
What does retiling cost in Hong Kong?
Tiling labour runs roughly HK$40-90 per sq ft depending on format, with a full bathroom hack-and-retile including waterproofing commonly HK$30,000-60,000 in a typical flat. Quotes are per sq ft — always get the measured area in writing.
Free, no obligation. Sign in with Google to send your request.
How Handld works
- 1
Tell us what you need
Describe the job and where you are. It takes about a minute.
- 2
We match your request
Your request goes to local professionals who cover your area and service.
- 3
Compare quotes and choose
Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.