Flooring Installation in Kennedy Town

Subfloor prep means making the base flat, dry and sound: self-levelling compound over uneven concrete, replacing damaged boards or plywood, and adding a moisture barrier over slabs. Skipping it causes clicking joints, gaps and premature wear, and it voids most manufacturer warranties. It is normally priced separately per area, so ask every installer to inspect and price it before you compare quotes.

Waterproof materials: vinyl plank/tile, ceramic or porcelain tile, or specifically water-rated laminate. Standard laminate and solid wood swell when water gets into joints, so most installers will advise against them in wet rooms even if you like the look.

Order 8-10% more than the measured area to cover cutting waste, and 12-15% for diagonal or herringbone patterns. Keep a spare box after the job for future repairs — matching a discontinued product years later is difficult.

Vinyl plank (LVP/LVT) is fully waterproof, so it is the safer choice for kitchens, bathrooms and laundries, and it is quieter underfoot. Laminate has a harder, more scratch-resistant wear surface and often looks more like real wood, but standard laminate swells if water sits on it. Prices overlap heavily, so choose by room use rather than price.

Solid hardwood can usually be sanded and refinished 2-3 times over its life, at a fraction of replacement cost. Engineered wood can typically take one light sanding if the top layer is thick enough. Replace when boards are cupped or rotten from water damage, or the wear layer is too thin to sand.

Yes. Solid and engineered wood (and to a lesser degree laminate) should sit in the room where it will be installed for 48-72 hours so it adjusts to local temperature and humidity. Skipping this step is a common cause of gapping and buckling months later. A good installer will schedule delivery a few days before fitting.

Installed click vinyl typically runs HK$20-HK$60 per square foot, and engineered wood HK$40-HK$120 depending on veneer and brand. Small flats push per-foot rates up because minimum job charges are spread over less area.

For flooring alone, no government permit — but your building's management office almost certainly requires a renovation application, deposit, and set working hours. Public housing (HA) flats have their own approval lists and rules, so check before signing a contractor.