Bathroom Renovation in North Delta

It can work on sound, well-bonded wall tiles and saves strip-out cost, but it fails on floors with movement, adds thickness that fouls doors and fittings, and hides the condition of the substrate and membrane. Most renovators strip back in wet areas — if a contractor proposes tile-over-tile in the shower zone specifically, treat it as a cost-cutting red flag.

Make every quote in North Delta state: strip-out and disposal, first-fix plumbing and electrical, waterproofing (product named), tiling with a per-square-metre rate and tile allowance, fittings supply (brands listed or marked as owner-supplied), and second-fix. The cheapest quote is usually the one missing a line — often waterproofing or disposal.

Around 10-20% is normal, sometimes more where custom vanities or imported fittings must be ordered up front — in that case pay the supplier invoice share, not a round 50%. Hold 5-10% back until the room has been used for a week or two and the snag list (grout gaps, silicone, door alignment) is closed.

Strip-out, then first-fix plumbing and electrics (pipes and cables in walls), then substrate preparation and waterproofing, then tiling, then second-fix (toilet, vanity, taps, shower screen, lights), then silicone and snagging. If a quote or schedule doesn't follow this order, question it — out-of-sequence work is how leaks and redone tiles happen.

Typical full renovations run CAD 12,000-28,000 with mid-range projects around CAD 18,000; budget refreshes start near CAD 5,000-8,000 and high-end or primary-bath projects reach CAD 40,000-70,000 in major metros. These track US Angi/HomeAdvisor figures adjusted to Canadian labour rates and CAD.

Yes — interior work is season-proof and many renovators discount January-March when exterior work stops. The main winter caveat is ventilation during tiling and curing; make sure the contractor plans for it rather than opening windows at -20°C.