Bathroom Renovation in Renfrew-Collingwood

A like-for-like refit usually needs no permit in Renfrew-Collingwood, but moving drainage, altering walls, or adding a new bathroom typically does under your local building rules — and electrical and plumbing work must be done by qualified or licensed trades in most countries. Ask your contractor to name the specific approval needed; see the country checklist on this page for what applies where you live.

Buying your own toilet, vanity, and taps gives price control; buying through the contractor makes them responsible for defects, wrong sizes, and delivery timing. A common middle path: contractor supplies everything built-in or warranty-critical (shower valves, waste, membrane), you supply visible items like mirrors and accessories. Whoever supplies an item owns replacing it if it arrives damaged.

Walk-in showers cost less to build than bath-plus-screen setups, use less space, and suit ageing-in-place. Keep at least one bathtub in the home if you may sell to families — in most markets a home with no bath at all narrows the buyer pool. If you have two bathrooms, the common answer is one of each.

A straight swap-in-place refit takes about 1-2 weeks; a full renovation with new waterproofing, retiling, and any layout change takes 2-4 weeks. Add waiting time before the start for fixture delivery and trades scheduling — and note that waterproofing membranes need curing days you cannot compress.

Typical full renovations run CAD 12,000-28,000 with mid-range projects around CAD 18,000; budget refreshes start near CAD 5,000-8,000 and high-end or primary-bath projects reach CAD 40,000-70,000 in major metros. These track US Angi/HomeAdvisor figures adjusted to Canadian labour rates and CAD.

Yes — interior work is season-proof and many renovators discount January-March when exterior work stops. The main winter caveat is ventilation during tiling and curing; make sure the contractor plans for it rather than opening windows at -20°C.