Waterproofing in Hobart
Compare local waterproofing contractor pros in Hobart and get free quotes — no obligation, no call-backs you didn't ask for.
Typical price: A$800–A$30,000
Free, no obligation. Sign in with Google to send your request.
Waterproofing prices in Hobart
| Job size | Low | Typical | High |
|---|---|---|---|
| Wet-area / damp proofing (small) Bathroom or small wet-area membrane to AS 3740 | A$800 | A$1,800 | A$4,000 |
| Membrane / drainage system Cavity-drain membrane or below-ground drainage | A$4,000 | A$8,000 | A$15,000 |
| Full basement / structural waterproofing Full below-ground or structural system | A$8,000 | A$15,000 | A$30,000 |
How to hire a waterproofing pro in Australia
- For wet areas, use a licensed waterproofer and require compliance with AS 3740
- Get the water source diagnosed before choosing a below-ground system
- Ask for a certificate of compliance for regulated wet-area work
- Confirm the system spec and guarantee terms in writing
- Check the contractor's licence and insurance
In Australia, wet-area waterproofing (bathrooms, balconies, laundries) is regulated work that must comply with AS 3740 and, in most states, be done by a licensed waterproofer who issues a compliance certificate. Failed shower waterproofing is a leading building-defect claim.
Budgeting first?
See the full breakdown of what drives waterproofing prices — job sizes, unit rates, and how to save.
Frequently asked questions
Do I need a guarantee or warranty?
Yes — reputable structural waterproofing comes with an insurance-backed guarantee so the cover survives if the contractor ceases trading. Ask whether the guarantee is company-backed or independently insured, because a company-only warranty is worth little if they close.
How long does waterproofing last?
A properly installed cavity-drain or tanking system can last decades, and quality membranes carry long guarantees. Cheap surface coatings applied over an unaddressed water problem fail fast. Longevity depends on correct diagnosis and installation far more than the product.
What waterproofing does a bathroom or wet area need?
Wet areas need a waterproof membrane behind tiles on floors and walls, correctly detailed at junctions and drains. In many countries this is regulated work with a standard to meet — a failed shower membrane is one of the most common and costly building defects.
Why is my damp problem being oversold?
A common trap is a 'free survey' that always diagnoses rising damp and sells a chemical damp-proof course, when the real cause is condensation, a leaking gutter or bridged damp course. Get an independent, qualified diagnosis before paying for injected chemicals.
What's the difference between damp proofing and waterproofing?
Damp proofing resists moisture and rising damp (like a damp-proof course in a wall); waterproofing resists liquid water under pressure, as in a basement below the water table. Below-ground and wet-area work needs true waterproofing, not just a damp treatment.
What does waterproofing cost in Australia?
A bathroom or wet area typically runs AUD 800-4,000, membrane and below-ground systems AUD 4,000-15,000, and full structural waterproofing AUD 8,000-30,000.
Free, no obligation. Sign in with Google to send your request.
How Handld works
- 1
Tell us what you need
Describe the job and where you are. It takes about a minute.
- 2
We match your request
Your request goes to local professionals who cover your area and service.
- 3
Compare quotes and choose
Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.
Waterproofing near Hobart
- Waterproofing in Launceston
- Waterproofing in Pakenham
- Waterproofing in Frankston
- Waterproofing in Frankston East
- Waterproofing in Berwick
- Waterproofing in Narre Warren South
- Waterproofing in Keysborough
- Waterproofing in Dandenong
- Waterproofing in Noble Park
- Waterproofing in Rowville
- Waterproofing in Geelong
- Waterproofing in Bentleigh East
- All waterproofing in Tasmania