Tiling in Tasmania

A full bathroom (floor plus walls) typically takes 3-5 days: prep and waterproofing first, then setting, then grouting after the adhesive cures. Add days if old tiles must come off or the substrate needs levelling. Rushing cure times is the classic cause of cracked grout later.

Either works, but you usually choose and buy tiles yourself and the tiler supplies adhesive, grout and trims. Order 10-15% extra for cuts and breakage (more for patterns and large formats) and keep leftovers for future repairs. Have tiles on site before the tiler starts.

Almost always substrate or installation, not the tile: movement in the floor, missing expansion joints, adhesive coverage too thin (spot-dabbing), or tiling over a drummy layer. Cracked single tiles from impact are replaceable if you kept spares — always keep a box.

Confirm five things: substrate prep (levelling, boards), waterproofing in wet areas, adhesive and grout type, cuts and trims (edge profiles), and silicone to finish. Tiles themselves are usually excluded, and removing old tiles is a separate line that can rival the laying cost.

Removal is priced per square metre and depends on what's underneath: tiles on board come off fast, tiles on thick sand-cement beds are slow, noisy demolition work. Budget for substrate repairs after removal — you rarely know the wall or floor condition until tiles are off.

Labour typically runs $45-90 per m² for standard formats, higher for large-format porcelain, stone and laundries with complex falls. A full bathroom retile with certified waterproofing commonly lands $4,000-8,000 before tiles.