Tiling in Narre Warren South
Compare local wall and floor tiling pros in Narre Warren South and get free quotes — no obligation, no call-backs you didn't ask for.
Typical price: A$280–A$9,200
Free, no obligation. Sign in with Google to send your request.
Tiling prices in Narre Warren South
| Job size | Low | Typical | High |
|---|---|---|---|
| Kitchen splashback Tile a standard splashback (~3 m²), tiles excluded | A$280 | A$460 | A$830 |
| Bathroom floor Prep and tile an average bathroom floor | A$550 | A$920 | A$1,650 |
| Full bathroom retile Strip, waterproof (certified) and retile floor plus walls | A$3,200 | A$5,500 | A$9,200 |
How to hire a tiling pro in Australia
- Check licensing: QLD requires QBCC licensing for tiling over $3,300; NSW requires a licence for residential work over $5,000; waterproofing is separately licensed in most states
- Confirm waterproofing to AS 3740 with a compliance certificate for wet areas
- Ask for public liability insurance and an ABN invoice
- Get the quote per m² with substrate prep, trims and silicone included
- Confirm falls to floor wastes in showers are in scope
- Check reviews on hipages with wet-room photos
Wet-area waterproofing must comply with AS 3740 and is a licensed activity in most Australian states, with compliance certificates issued for bathroom works. Tiling itself is licensed above value thresholds (QBCC in QLD, Fair Trading in NSW).
Budgeting first?
See the full breakdown of what drives tiling prices — job sizes, unit rates, and how to save.
Frequently asked questions
How much does tiling cost?
Tilers price labour per square metre (or square foot), with tiles, adhesive, grout and prep on top. Small-format ceramic on a flat floor is the base rate; large-format porcelain, natural stone, mosaics, herringbone patterns and wall work all cost more per unit because they are slower and less forgiving.
How much does it cost to remove old tiles?
Removal is priced per square metre and depends on what's underneath: tiles on board come off fast, tiles on thick sand-cement beds are slow, noisy demolition work. Budget for substrate repairs after removal — you rarely know the wall or floor condition until tiles are off.
Why are my new tiles cracking or coming loose?
Almost always substrate or installation, not the tile: movement in the floor, missing expansion joints, adhesive coverage too thin (spot-dabbing), or tiling over a drummy layer. Cracked single tiles from impact are replaceable if you kept spares — always keep a box.
How long does tiling a bathroom take?
A full bathroom (floor plus walls) typically takes 3-5 days: prep and waterproofing first, then setting, then grouting after the adhesive cures. Add days if old tiles must come off or the substrate needs levelling. Rushing cure times is the classic cause of cracked grout later.
How do I find a good tiler in Narre Warren South?
Ask tilers in Narre Warren South for photos of finished wet rooms and floor-to-wall junctions — lippage (uneven tile edges), crooked grout lines and bad cuts around fittings are where cheap work shows. Good tilers also talk about substrate prep and waterproofing before they talk about tiles.
What does tiling cost per m² in Australia?
Labour typically runs $45-90 per m² for standard formats, higher for large-format porcelain, stone and laundries with complex falls. A full bathroom retile with certified waterproofing commonly lands $4,000-8,000 before tiles.
Free, no obligation. Sign in with Google to send your request.
How Handld works
- 1
Tell us what you need
Describe the job and where you are. It takes about a minute.
- 2
We match your request
Your request goes to local professionals who cover your area and service.
- 3
Compare quotes and choose
Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.