Tiling in Central Coast
Compare local wall and floor tiling pros in Central Coast and get free quotes — no obligation, no call-backs you didn't ask for.
Typical price: A$300–A$10,000
Free, no obligation. Sign in with Google to send your request.
Tiling prices in Central Coast
| Job size | Low | Typical | High |
|---|---|---|---|
| Kitchen splashback Tile a standard splashback (~3 m²), tiles excluded | A$300 | A$500 | A$900 |
| Bathroom floor Prep and tile an average bathroom floor | A$600 | A$1,000 | A$1,800 |
| Full bathroom retile Strip, waterproof (certified) and retile floor plus walls | A$3,500 | A$6,000 | A$10,000 |
How to hire a tiling pro in Australia
- Check licensing: QLD requires QBCC licensing for tiling over $3,300; NSW requires a licence for residential work over $5,000; waterproofing is separately licensed in most states
- Confirm waterproofing to AS 3740 with a compliance certificate for wet areas
- Ask for public liability insurance and an ABN invoice
- Get the quote per m² with substrate prep, trims and silicone included
- Confirm falls to floor wastes in showers are in scope
- Check reviews on hipages with wet-room photos
Wet-area waterproofing must comply with AS 3740 and is a licensed activity in most Australian states, with compliance certificates issued for bathroom works. Tiling itself is licensed above value thresholds (QBCC in QLD, Fair Trading in NSW).
Budgeting first?
See the full breakdown of what drives tiling prices — job sizes, unit rates, and how to save.
Frequently asked questions
How much does tiling cost?
Tilers price labour per square metre (or square foot), with tiles, adhesive, grout and prep on top. Small-format ceramic on a flat floor is the base rate; large-format porcelain, natural stone, mosaics, herringbone patterns and wall work all cost more per unit because they are slower and less forgiving.
Can you tile over existing tiles?
Sometimes — if the old tiles are solidly bonded and the extra height works at doors and fittings, tiling over is legitimate and avoids messy removal. It fails when old tiles are drummy (hollow-sounding) or the wall can't take the weight. A good tiler taps and checks before promising either way.
Should I buy the tiles or does the tiler supply them?
Either works, but you usually choose and buy tiles yourself and the tiler supplies adhesive, grout and trims. Order 10-15% extra for cuts and breakage (more for patterns and large formats) and keep leftovers for future repairs. Have tiles on site before the tiler starts.
How long does tiling a bathroom take?
A full bathroom (floor plus walls) typically takes 3-5 days: prep and waterproofing first, then setting, then grouting after the adhesive cures. Add days if old tiles must come off or the substrate needs levelling. Rushing cure times is the classic cause of cracked grout later.
How much does it cost to remove old tiles?
Removal is priced per square metre and depends on what's underneath: tiles on board come off fast, tiles on thick sand-cement beds are slow, noisy demolition work. Budget for substrate repairs after removal — you rarely know the wall or floor condition until tiles are off.
What does tiling cost per m² in Australia?
Labour typically runs $45-90 per m² for standard formats, higher for large-format porcelain, stone and laundries with complex falls. A full bathroom retile with certified waterproofing commonly lands $4,000-8,000 before tiles.
Free, no obligation. Sign in with Google to send your request.
How Handld works
- 1
Tell us what you need
Describe the job and where you are. It takes about a minute.
- 2
We match your request
Your request goes to local professionals who cover your area and service.
- 3
Compare quotes and choose
Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.