Roofing in Preston

Sometimes — an overlay saves tear-off cost but hides deck problems, adds weight, and often shortens the new roof's life and warranty. Many codes and manufacturers limit roofs to two layers. Tear-off costs more upfront and is usually the better long-term decision; get both options priced.

Repair when damage is localised — a few slipped tiles, one flashing leak — and the roof is under about two-thirds of its expected life. Replace when leaks recur in different places, more than roughly 30% of the covering is failing, or repair quotes start approaching a third of replacement cost. A good roofer will show you photos from the roof to justify either answer.

Flashing is the metal detailing that seals joints — around chimneys, valleys, vents, skylights and wall junctions. These joints move and collect water flow, so flashing fails long before the main covering. If a roofer proposes reusing old flashing on a full replacement, push back.

Two separate ones: a manufacturer warranty on materials (often 20-50 years, sometimes conditional on certified installation) and the contractor's own workmanship warranty (5-10 years is respectable). Get both in writing and understand what voids them — foot traffic, unventilated attics and pressure washing are common exclusions.

A full replacement runs roughly AUD $10,000 for a small single-storey home to $40,000+ for a large two-storey, with metal (Colorbond) and concrete tile the mainstream options. Roof restoration — clean, rebed, repoint and repaint — is the cheaper alternative at about $2,500-$7,000 when the roof is structurally sound.

Restoration keeps the existing tiles or sheets: high-pressure clean, replace broken tiles, rebed and repoint ridges, then seal and paint. It costs a fraction of replacement and adds 10-15 years to a sound roof, but it cannot fix widespread corrosion, cracked battens or failed sarking.