Roofing in Hobart
Compare local roofer / roof plumber pros in Hobart and get free quotes — no obligation, no call-backs you didn't ask for.
Typical price: A$150–A$45,000
Free, no obligation. Sign in with Google to send your request.
Roofing prices in Hobart
| Job size | Low | Typical | High |
|---|---|---|---|
| Minor repair Broken tiles, flashing or small leak repair | A$150 | A$600 | A$3,000 |
| Roof restoration Clean, rebed, repoint and repaint existing roof | A$2,500 | A$4,500 | A$7,000 |
| Full replacement, single-storey Strip and replace with metal or tile | A$10,000 | A$18,000 | A$30,000 |
| Full replacement, large two-storey Strip and replace with full height safety | A$20,000 | A$30,000 | A$45,000 |
How to hire a roofing pro in Australia
- For metal roofing, guttering and flashings, use a licensed roof plumber — it's a licensed trade in most states (e.g. Victoria); in Queensland check the QBCC licence for work over $3,300
- Verify ABN, licence number and insurance on the state regulator's register before signing
- Expect edge protection or scaffolding as a quote line — WorkSafe height rules make it legitimate, not padding
- Book inspections before storm season (late spring) rather than after damage
- Get tear-off, sarking (underlay), flashing replacement and disposal itemised
- For tile roofs, ask whether rebedding and repointing ridge capping is included
- Get manufacturer (e.g. Colorbond) and workmanship warranties in writing
Roof plumbing — metal roofing, guttering and flashings — is a licensed trade in most Australian states, and Queensland's QBCC licence covers building work over $3,300. WorkSafe height-safety rules mean edge protection is a standard, legitimate cost on most roof jobs.
Budgeting first?
See the full breakdown of what drives roofing prices — job sizes, unit rates, and how to save.
Frequently asked questions
Should I repair my roof or replace it?
Repair when damage is localised — a few slipped tiles, one flashing leak — and the roof is under about two-thirds of its expected life. Replace when leaks recur in different places, more than roughly 30% of the covering is failing, or repair quotes start approaching a third of replacement cost. A good roofer will show you photos from the roof to justify either answer.
How long does a roof last?
Typical service lives: asphalt shingles 15-30 years, concrete tile 40-60, clay tile and slate 60-100+, metal 40-70, flat membranes (felt, EPDM, TPO) 15-30. Underlayment and flashings usually fail before the covering itself, which is why old roofs leak even with intact tiles.
How long does a roof replacement take?
A straightforward single-family roof takes 1-3 days for asphalt shingles or metal sheeting, and up to 1-2 weeks for tile, slate or complex multi-plane roofs. Weather delays are normal — a competent crew will never strip more roof than they can waterproof the same day.
What are the warning signs I need roof work?
Missing, cracked or slipped tiles/shingles; granules collecting in gutters; daylight visible in the attic; damp patches or staining on top-floor ceilings; sagging roof lines; and moss holding moisture against the surface. Catching these early usually means a repair instead of a replacement.
Will insurance pay for my roof?
Policies generally cover sudden storm damage (wind, hail, fallen trees) but not gradual wear and age. Document damage with dated photos immediately, get an independent assessment before signing anything a door-knocking contractor puts in front of you, and check whether your policy pays replacement cost or depreciated value on older roofs.
How much does roof replacement cost in Australia?
A full replacement runs roughly AUD $10,000 for a small single-storey home to $40,000+ for a large two-storey, with metal (Colorbond) and concrete tile the mainstream options. Roof restoration — clean, rebed, repoint and repaint — is the cheaper alternative at about $2,500-$7,000 when the roof is structurally sound.
What's the difference between roof restoration and replacement?
Restoration keeps the existing tiles or sheets: high-pressure clean, replace broken tiles, rebed and repoint ridges, then seal and paint. It costs a fraction of replacement and adds 10-15 years to a sound roof, but it cannot fix widespread corrosion, cracked battens or failed sarking.
Free, no obligation. Sign in with Google to send your request.
How Handld works
- 1
Tell us what you need
Describe the job and where you are. It takes about a minute.
- 2
We match your request
Your request goes to local professionals who cover your area and service.
- 3
Compare quotes and choose
Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.