Pressure Washing in Bathurst

Fresh oil mostly comes out with a degreaser pre-treatment plus hot-water pressure washing. Old oil that has soaked deep into concrete may only fade, not disappear — an honest pro will tell you this before quoting rather than promising full removal. Ask specifically whether stain treatment is included or extra.

A proper quote lists: each surface and its approximate area, the method per surface (high pressure vs soft wash), pre-treatments or chemicals used, weed and moss removal, rinsing and tidy-up, and whether resealing or re-sanding is included. It should also state who supplies water and power, and what happens if rain forces a reschedule.

Yes. Too much pressure or the wrong nozzle can etch concrete, blast mortar out of brick joints, splinter timber decking, strip paint, and force water behind siding or render. Roof tiles are especially vulnerable. Ask the pro what PSI and nozzle they plan to use per surface, and whether they soft wash delicate areas.

Four things drive the spread: surface area and condition (heavy staining doubles the time), access (upper storeys, tight side passages), method (soft washing with chemicals costs more than a quick rinse), and what is bundled (resealing, weed treatment, gutter clear-out). A cheap quote is often just a rinse with no pre-treatment — clarify the scope before comparing numbers.

Safe at high pressure: concrete, block paving, natural stone (with care), brick in good condition, metal fences and gutter exteriors. Needs low pressure or soft washing: painted surfaces, render, timber decking, vinyl or fibre-cement siding, roofs, and old or repointed brickwork. Never pressure wash: single-glazed windows at close range, electrical fittings, or asbestos-containing materials.

Usually yes — most state restriction schedules treat high-pressure cleaners as water-efficient devices and allow their commercial use even when hosing driveways with a garden hose is banned. Rules differ by state and restriction stage, so ask the cleaner to confirm compliance for your council area.

Common pricing is $3-$5 per m² or $120-$165 per hour. A typical driveway runs about $155-$365 depending on size, staining, and access, and a full house wash $250-$700. Sydney prices sit at the top of the range.