Paving & Driveways in Gold Coast

Driveway cost depends on area, material (asphalt, concrete, block/brick pavers, gravel, resin) and how much excavation and sub-base work is needed. Gravel is cheapest, asphalt and plain concrete mid-range, and block paving or resin-bound surfaces the most expensive per square metre. Quotes should always include excavation, sub-base depth and edging.

Often yes — asphalt can be overlaid if the base is sound, concrete can sometimes be resurfaced or used as a base for pavers, and sunken block paving can be lifted and relaid on fresh bedding. If the base has failed (widespread cracking, deep ruts), resurfacing only buys a year or two.

Yes. 'We have leftover asphalt from a job down the road' is a classic scam — the material is often laid thin over no base and fails within months, and the crew is untraceable. Reputable paving firms price from a site visit and written spec, not from surplus material on a truck.

A skimped sub-base. The surface layer gets the attention, but 100-200mm of properly compacted hardcore beneath it is what stops sinking, cracking and rutting. Quotes that are far below the rest usually save money underground where you cannot see it.

On a proper base: asphalt 15-25 years, concrete 25-40, block paving 25+ (with occasional re-sanding and weed control), gravel indefinitely with topping up. Sealing asphalt and concrete every few years extends life in harsh climates.

The strip between the road and your boundary belongs to council. It needs its own permit, inspection and often a heavier spec than the rest of the driveway, so contractors price it separately — and some make you contract with council-approved crews for that section.